4. Photography
Operation of the retinal camera in the system using this adapter is basically the same as in the general retinal photography.
Please also refer to the manuals of the
NOTE: FCD (Flash Compensation by Diopter) does not operate in the photography using this adapter. Also, fluorescent photography cannot be performed with the
Step 1 Turn ON the power
(I)Be sure to turn ON the power in the order of digital camera and then the retinal camera.
Step 2 Adjust the flash intensity of retinal camera.
(1)When the adapter is attached, "DA" is displayed on the lower right side of the retinal camera monitor. Press the switch under it.
C 123456
DA
SET 6
000.
(2)The display changes as shown below.
Adjust the flash intensity as required using the switches under
<FLASH SET>
|
| DA |
RTN | + | 6 |
0 •• 0
- 3 -