VBrick Systems VB6000, VB4000, VB5000 manual Jpeg Capture Constraints, Jpeg FTP Configuration

JPEG FTP Configuration

The following fields determine how the JPEG images are handled with respect to an FTP server.

Transfer Mode	• Archive – Default mode. Each image is saved as a separate
	file up to the value in Max Number of Files on Server. After
	the maximum, the files begin to overwrite.
	• Single Image – Only one image is saved and overwritten on
	the server.
IP Address or Name of	IP address or machine name of FTP server. Default = blank.
Server
File Name on Server	Archive mode – This is the base file name to which incremental
	numbers are appended. If the base file name is VBrick1- for
	example, the captured images will be named VBrick1-1,
	VBrick1-2, and so on.
	Single Image – A .jpg extension will be appended to the base
	file name. Default = blank.
Max Number of Files on	1–1000000. The maximum number of files that will be saved on
Server	the FTP server. Default = 200.
Path on Server	Folder name where images are saved on FTP server. Default =
	root.
FTP User Name	FTP user name. Default = UserName.
FTP Password	FTP password. Default = UserPassword (hidden).
FTP Account	FTP server account login. Default = AccountName.
Max FTP Duration	1–60 seconds. Default = 60. After a server interruption, the
	time to wait before closing the connection and trying again.

JPEG Capture Constraints

Due to memory requirements, JPEG capture can reduce the maximum number of supported clients a dual WM encoder (with archiver), or dual WM and MPEG-2 encoder (with archiver) can support. The following table shows how the configuration for JPEG capture affects the maximum number of supported clients. Also be aware that JPEG capture on a WM encoder will consume significant CPU resources. This can degrade the streaming video—especially with higher video resolutions and frequent image captures.

68 © 2008 VBrick Systems, Inc.