VBrick Systems VB4000, VB6000 Configuration Passthrough, Hard Drive Status, FTP Queue Operation

State	The current state of the hard drive. Values can be:
	•	Transfer in Progress.
	•	Idle.
	•	Invalid FTP Server.
	•	Invalid User Name.
	•	Invalid User Password.
	• Local File Open Error.
	•	Socket Open Failure.
	•	Transfer Failure.
	•	Socket Quit Failure.
Size	Size of the file to be sent.
Rate	Transmitted data rate of the file being FTPed.
Transfer	Current amount transferred.

Last Queue Operation File added OK, File removed OK, or blank.

FTP Queue Operation

Changes to the entries on the screen do not take effect until you select an action button: Add

to FTP Queue, Remove from FTP Queue or Flush Queue.

Directory	Choose the directory on the hard drive that contains the file you want
	to send.
File	File name on the hard drive.
Destination	Server to which the file or files is to be transferred. Servers are
	configured in the Servers section of the same page.
Add to FTP Queue	Adds the selected file to the FTP queue. The FTP transfer starts
	immediately.
Remove from FTP	Remove the selected file from the FTP queue.
Queue
Flush Queue	Removes all the current files from FTP queue.

Hard Drive Status

For a description of hard drive status screens, see Status: Hard Drive on page 102.

Configuration: Passthrough

The TCP/IP network can serve as an intermediary between two VBricks and their serial ports or between a PC application sending IP packets and a VBrick's serial port. This feature supports a wide range of serial applications. Contact VBrick support for details and restrictions. RS-232 end-to-end control is initiated by enabling or disabling Passthrough. For more about passthrough, and how it can be used, see the VBrick Appliance Getting Started Guide.

72 © 2008 VBrick Systems, Inc.