SonicWALL SonicWALL UTM Appliance manual

Page 5

Step 5: On the Settings tab of the LDAP Configuration window, configure the following fields:

•Name or IP Address – The FQDN or the IP address of the LDAP server against which you wish to authenticate. If using a name, be certain that it can be resolved by your DNS server. Also, if using TLS with the ‘Require valid certificate from server’ option, the name provided here must match the name to which the server certificate was issued (i.e. the CN) or the TLS exchange will fail.

•Port Number – The default LDAP over TLS port number is TCP 636. The default LDAP (unencrypted) port number is TCP 389. If you are using a custom listening port on your LDAP server, specify it here.

•Server Timeout – The amount of time, in seconds, that the SonicWALL will wait for a response from the LDAP server before timing out. Allowable ranges are 1 to 99999, with a default of 10 seconds.

•Anonymous Login – Some LDAP servers allow for the tree to be accessed anonymously. If your server supports this (Active Directory generally does not), then you may select this option.

•Login User Name – Specify a user name that has rights to log in to the LDAP directory. The login name will automatically be presented to the LDAP server in full ‘dn’ notation. This can be any account with LDAP read privileges (essentially any user account) – Administrative privileges are not required. Note that this is the user’s name, not their login ID (e.g. John Smith rather than jsmith).

•Login Password – The password for the user account specified above.

•Protocol Version – Select either LDAPv3 or LDAPv2. Most modern implementations of LDAP, including Active Directory, employ LDAPv3.

•Use TLS – Use Transport Layer Security (SSL) to log in to the LDAP server. It is strongly recommended that TLS be used to protect the username and password information that will be sent across the network. Most modern implementations of LDAP server, including Active Directory, support TLS. Deselecting this default setting will display an alert that you must accept to proceed.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Contents Page Integrating LDAP/Active Directory with Sonicwall UTM Configuring the CA on the Active Directory ServerImporting the CA Certificate onto the SonicWALL Configuring the SonicWALL Appliance for LdapPage Page Page Page Page Page Page Enable Radius to Ldap Relay Enables this feature Authentication Page Page Page Creating Firewall Rules with Ldap Groups/Users SonicOS Options That Leverage Groups/UsersPage Page Firewall Rules with Bandwidth Management & Logging Page Blocking Domains with Firewall Rules Blocking Websites Domain Names for Groups/UsersPage Page Navigate to Firewall Access Rules Create a rule to allow Http traffic for your allowed lists Do the same for Https Create the deny rules for Http and Https Firewall rules should now look like the below picture Blocking Https SSL Domains with SSL Control Configuring a SSL Blacklist and Whitelist Page Applying Different CFS Policies to Groups Page Creating Custom CFS Policies Navigate to the Policy tab and add a new CFS policy Page Page Page Http//$$fwinterface$$/$#SWLSTYLESCSS#$ Variables for Custom Block Page in SonicOSAdvanced Sample Code for SonicOS Basic Sample Code for SonicOSPage Page Sample Code for SonicOS 5.1 or Earlier Sample JavaScript Code for SonicOSApplying Application Firewall Polices to Groups/Users Page Page Page Page Tightening Control over the Browsing Behavior of Users Blocking IM Traffic Categorically Applying Granular IM Policies Global VPN Client GVC Applying VPN Access Policies to Groups/UsersPage SSL-VPN NetExtender Guest Services Wireless Guest Services
Top Page Image Contents