RS-232 Operation, Installing the Software

CONTRAST, BRIGHTNESS, COLOR & SHHARP: These keys

allow adjustment to be made to the labeled signalPOWER parameters. Press one of the keys, then use the arrow keys

to make adjustments.

CONTRAST

V-RESET: Restores factory default settings to the Contrast,

Brightness Color and Sharpness parammeters.

BRIGHT

NTSC/PAL: Selects the television standard to use on the 1361 output.

SYS-RESET: Restores factory presets to all parameters (Overscan, NTSC, 4:3 Aspect Ratio, Siggnal Parameters and CV/SV Output).

COLOR

SHARP

COLORBAR: Causes an internally gen erated color bar signal	V-RESET
to appear on the unit’s outputs.
	NTSC/PAL
SYS-RESET	COLORBAR

5.1 RS-232 Operation

Software is included to allow control of the 1361 via a computer. The operation under RS-232 control is explained in the following

pages.

5.1.1Installing the Software

•Compatability: Windows 98/ME/2000/XP

•Place the CD in the drive and execute the setup.exe function from the CD.

•The computer will probably update some files causing the need to reboot after the initial setup has finished. If this happens, reboot and run setup a second time.

•Once fully installed, click the taskbar menu (Start>Programs>Scan Converter) to start the RS-232 software.

Pinouts for RS-232 Cable

1361	PC Serial
Connector	Connector
Pinout	Pinout
1, NC	1, NC
2, TxD	2, RxD
3, RxD	3, TxD
4, NC	4, NC
5, GND	5, GND
6, NC	6, NC
7, NC	7, NC
8, NC	8, NC
9, NC	9, NC