Electrical Requirements

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capa- ble of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

!WARNING

To avoid fire or shock, follow all wiring instructions carefully.

Any electrical work not described in these instructions should be done or approved by a licensed electrician.

How to Hang Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 1).

CEILING

2. Carefully lift the motor assembly and engage the slot in the motor bracket with the hook on the mounting plate/light fitter so that it is securely suspended (Figure 3). Then connect wiring to your fan according to section "HOW TO WIRE YOUR CEILING FAN".

AT LEAST

Figure 1

FLOOR

!WARNING

THREADED

STUDS (4)

SUPPLY WIRE LEADS

MOUNTING PLATE/

LIGHT FITTER HOOK

MOTOR

The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs.

!WARNING

1. Pass the supply wires (black, white and ground) through the center hole and securely attach the mounting plate/light fitter to the outlet box (Figure 2) using the two screws supplied with the outlet box.

OUTLET BOX

Figure 3

MOTOR BRACKET

3.Once wiring is completed, lift the motor bracket so that the four threaded studs on the mounting plate/light fitter protrude through the four holes in the motor bracket. (See Figure 4.)

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are not pinched between the motor bracket and the mounting plate/light fitter.

4.Securely tighten the four locknuts (supplied) onto the threaded studs. Fasten locknuts securely, then try to shake the motor bracket to ensure that the assembly is tight. Proceed to section "HOW TO PUT YOUR CEILING FAN TOGETHER".

MOUNTING PLATE/		HOOK		MOUNTING PLATE/	MOTOR
MOUNTING PLATE/		HOOK		LIGHT FITTER	MOTOR
LIGHT FITTER				FOUR 1/4-20	BRACKET
				FOUR 1/4-20
Figure 2	TWO SCREWS(SUPPLIED			LOCKNUTS	MOTOR
	TWO SCREWS(SUPPLIED			(SUPPLIED)
	WITH OUTLET BOX)		4	(SUPPLIED)
			4	Figure 4
				Figure 4

CF875 specifications

The Emerson CF875 is a sophisticated ceiling fan renowned for its blend of style and performance, making it a popular choice for both residential and commercial spaces. Designed with an emphasis on both aesthetics and functionality, this fan enhances the ambiance of any room while providing optimal airflow.

One of the standout features of the Emerson CF875 is its elegant design. Available in various finishes, including classic white, brushed steel, and oil-rubbed bronze, it complements a wide range of interior decors, from modern to traditional. The 72-inch blade span ensures that it can efficiently circulate air across large areas, making it ideal for spacious living rooms, master bedrooms, and open-concept spaces.

Equipped with a powerful yet quiet motor, the CF875 operates with minimal noise, even at higher speeds. This is particularly beneficial for those seeking a peaceful indoor environment, whether it’s for sleeping, relaxation, or work. The fan's motor is designed for long-lasting performance and energy efficiency, contributing to lower electricity bills while maintaining comfort.

The Emerson CF875 also features a unique blade pitch that optimizes airflow, ensuring efficient circulation. With the capability to operate in reverse, users can effectively manage air temperature throughout the year. In the summer months, it creates a cool breeze, while in winter, reversing the direction promotes even heat distribution from heating systems.

Installation of the CF875 is straightforward, and it is compatible with a range of control options, including wall controls, remote controls, and smart home systems. This level of versatility makes it user-friendly and adaptable to different preferences and setups.

Additionally, the CF875 is constructed with high-quality materials, ensuring durability and long-term satisfaction. The fan’s contemporary design aesthetics combined with its powerful cooling features make it an excellent addition to any space.

In summary, the Emerson CF875 excels in providing a perfect balance of design, efficiency, and functionality, making it a top choice among ceiling fans. Whether you're looking to enhance your home's comfort or improve airflow in a commercial setting, the CF875 delivers reliable performance with a touch of elegance. Its numerous features and advanced technologies truly set it apart in the ceiling fan market.