Using Your Ceiling Fan, Trouble Shooting | Emerson CF875 specification

Using Your Ceiling Fan

1. Restore electrical power to the electrical box by turn- ing the electricity on at the main fuse box or circuit breaker panel.

2. Check the operation of the fan by gently pulling on the fan switch pull chain.

reversing switch to opposite position, and turn fan on again. The fan blades will turn in the opposite direc- tion and reverse the airflow.

4. Check the operation of the light fixture by gently pulling on the light switch pull chain.

Your fan model is equipped with a 4-position, 3-speed fan pull chain switch. The operating sequence is as follows:

1st Pull – High 2nd Pull – Medium 3rd Pull – Low 4th Pull – OFF

3. All fans are shipped from the factory with the re-vers- ing switch positioned to circulate air downward. If air- flow is desired in opposite direction, turn your fan off and wait for the blades to stop turning, then slide the

FAN SWITCH

PULL CHAIN

Figure 12

REVERSING

SWITCH

LIGHT SWITCH

PULL CHAIN

!WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.

Trouble Shooting

TROUBLE		PROBABLE CAUSE		SUGGESTED REMEDY
1. Fan will not	1. Reversing switch in neutral position.		1.	Make sure reversing switch position is
start.				all the way to one side.
	2.	Fuse or circuit breaker blown.	2.	Check main and branch circuit fuses or
				circuit breakers.
	3.	Loose power line connections to the fan,	3.	Check line wire connections to fan and
		or loose switch wire connections in switch		switch wire connections in the switch
.		housing/light fitter.		housing/light fitter.

2. Fan sounds	1. Blades not attached to fan.		1.	Attach blades to fan before operating.
noisy.	2. Screws securing fan blade flanges		2.	Check to make sure the screws which
		to motor are loose.		attach the fan blade flanges to the
				motor are tight.
	3.	Wire connectors inside switch housing/light	3.	Check to make sure wire connectors
		fitter rattling.		in switch housing/light fitter are not rattling
				against each other or against the interior
				wall of the switch housing/light fitter.
	4.	Screws holding flanges to blades are loose.	4.	Tighten screws securely.

3. Fan wobbles	1. Screws securing fan blade flanges to		1.	Check to be sure screws which attach
or shakes		motor are loose.		the fan blade flanges to the motor are tight.
excessively	2. Fan blade flanges not seated properly.		2.	Check to be sure the fan blade flanges
				seat firmly and uniformly to the surface
				of the motor. If flanges are seated
				incorrectly, loosen the screws and retighten.
	3.	Mounting plate/light fitter and/or ceiling	3.	Tighten the mounting plate/light fitter
		outlet box are not securely fastened.		screws to the outlet box, and/or secure
`				outlet box.
	4.	Fan blades out of balance.	4.	Interchanging an adjacent (side-by-
				side) blade pair can redistribute the
				weight and result in smoother operation.

Maintenance

IMPORTANT CARE INSTRUCTIONS

For Your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.

Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.

!WARNING

Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.

CF875 specifications

The Emerson CF875 is a sophisticated ceiling fan renowned for its blend of style and performance, making it a popular choice for both residential and commercial spaces. Designed with an emphasis on both aesthetics and functionality, this fan enhances the ambiance of any room while providing optimal airflow.

One of the standout features of the Emerson CF875 is its elegant design. Available in various finishes, including classic white, brushed steel, and oil-rubbed bronze, it complements a wide range of interior decors, from modern to traditional. The 72-inch blade span ensures that it can efficiently circulate air across large areas, making it ideal for spacious living rooms, master bedrooms, and open-concept spaces.

Equipped with a powerful yet quiet motor, the CF875 operates with minimal noise, even at higher speeds. This is particularly beneficial for those seeking a peaceful indoor environment, whether it’s for sleeping, relaxation, or work. The fan's motor is designed for long-lasting performance and energy efficiency, contributing to lower electricity bills while maintaining comfort.

The Emerson CF875 also features a unique blade pitch that optimizes airflow, ensuring efficient circulation. With the capability to operate in reverse, users can effectively manage air temperature throughout the year. In the summer months, it creates a cool breeze, while in winter, reversing the direction promotes even heat distribution from heating systems.

Installation of the CF875 is straightforward, and it is compatible with a range of control options, including wall controls, remote controls, and smart home systems. This level of versatility makes it user-friendly and adaptable to different preferences and setups.

Additionally, the CF875 is constructed with high-quality materials, ensuring durability and long-term satisfaction. The fan’s contemporary design aesthetics combined with its powerful cooling features make it an excellent addition to any space.

In summary, the Emerson CF875 excels in providing a perfect balance of design, efficiency, and functionality, making it a top choice among ceiling fans. Whether you're looking to enhance your home's comfort or improve airflow in a commercial setting, the CF875 delivers reliable performance with a touch of elegance. Its numerous features and advanced technologies truly set it apart in the ceiling fan market.