How To Wire Your Ceiling Fan

If you feel that you do not have enough wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock be sure electricity is turned off at the main fuse box or circuit breaker before wiring.

NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advise for it must be grounded for safe operation.

1.Connect the green grounding wire from the motor bracket and the green wire from the mounting plate/light fitter to the grounding conductor of sup- ply (this may be a bare wire or wire with green col- ored insulation). Securely connect wires with wire connector supplied. (Figure 5.)

		120V SUPPLY
	GROUND	WHTIE
	GROUND	BLACK
	WHITE	BLACK
	WHITE
GREEN GROUND		BLUE
GREEN GROUND		BLACK

ORANGEWHITE

2. Securely connect the motor orange wire to the mounting plate/light fitter orange wire using wire connector supplied. (Figure 5).

3. Securely connect the fan motor white wire and the mounting plate/light fitter white wire to the supply white (neutral) wire using wire connector supplied. (Figure 5).

4. Connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied. (Figure 5). Your fan is now wired to be turned on and off from the fan switch. After connec- tions have been made, turn leads upward and care- fully push leads up into the outlet box.

!WARNING

To avoid risk of fire or shock check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

5. Return to Step 3 of section "HOW TO HANG YOUR CEILING FAN".

Figure 5

How To Put Your Ceiling Fan Together

1.Screw four 7-watt 120 volt light bulbs into the sock- ets on the mounting plate/light fitter.

2.Install two 3/16-24 x 3/8” screws (several turns) into screw holes on opposite sides of the mounting plate/light fitter (Figure 6). Position the crystal glass housing so that the keyhole slots in the crystal glass housing engage with the two screws. Turn the housing to the right so the keyhole slots rest on the screws; tighten the screws. Install the other two 3/16-24 x 3/8” screws.

3. Mount the blade flanges to the fan blades using three 3/16-24 x 9/32” screws per blade (Figure 7). Repeat for four remaining blades.

!WARNING

To reduce the risk of personal injury, do not bend the blade flanges when installing the flanges, balancing the blades, or cleaning the fan.

KEYHOLE SLOT

3/16-24 x 3/8"

SCREW

CRYSTAL

GLASS

HOUSING

Figure 6

5Figure 7

(3) 3/16-24 x 9/32" SCREWS

BLADE

FLANGE

FAN BLADE

CF875 specifications

The Emerson CF875 is a sophisticated ceiling fan renowned for its blend of style and performance, making it a popular choice for both residential and commercial spaces. Designed with an emphasis on both aesthetics and functionality, this fan enhances the ambiance of any room while providing optimal airflow.

One of the standout features of the Emerson CF875 is its elegant design. Available in various finishes, including classic white, brushed steel, and oil-rubbed bronze, it complements a wide range of interior decors, from modern to traditional. The 72-inch blade span ensures that it can efficiently circulate air across large areas, making it ideal for spacious living rooms, master bedrooms, and open-concept spaces.

Equipped with a powerful yet quiet motor, the CF875 operates with minimal noise, even at higher speeds. This is particularly beneficial for those seeking a peaceful indoor environment, whether it’s for sleeping, relaxation, or work. The fan's motor is designed for long-lasting performance and energy efficiency, contributing to lower electricity bills while maintaining comfort.

The Emerson CF875 also features a unique blade pitch that optimizes airflow, ensuring efficient circulation. With the capability to operate in reverse, users can effectively manage air temperature throughout the year. In the summer months, it creates a cool breeze, while in winter, reversing the direction promotes even heat distribution from heating systems.

Installation of the CF875 is straightforward, and it is compatible with a range of control options, including wall controls, remote controls, and smart home systems. This level of versatility makes it user-friendly and adaptable to different preferences and setups.

Additionally, the CF875 is constructed with high-quality materials, ensuring durability and long-term satisfaction. The fan’s contemporary design aesthetics combined with its powerful cooling features make it an excellent addition to any space.

In summary, the Emerson CF875 excels in providing a perfect balance of design, efficiency, and functionality, making it a top choice among ceiling fans. Whether you're looking to enhance your home's comfort or improve airflow in a commercial setting, the CF875 delivers reliable performance with a touch of elegance. Its numerous features and advanced technologies truly set it apart in the ceiling fan market.