MAINTENANCE |
Below follows some general maintenance instructions.
If you need further information please contact your service workshop.
Daily maintenance
1.Check that throttle components work correctly from a safety view point (throttle and starter throttle catch).
2.Clean the main filter.
3.Check the sprocket.
4.Check the condition of the bar.
5.Check the condition of the cutting chain.
6.Check the starter and the starter cord; clean the outside of the starter’s air intake.
7.Check that all nuts and bolts are tightened correctly.
8.Check the function of the stop switch.
9.Lubricate the chain, bar tip sprocket and bar to avoid corrosion.
Weekly maintenance
10.Check the
11.Check that the handles and the
12.Clean the spark plug. Check that the electrode gap is 0.5 mm.
13.Clean the cooling fins on the flywheel. Check the starter and recoil spring.
14.Clean the cooling fins on the cylinder.
15.Check the muffler.
16.Check the carburetor function.
Monthly maintenance
17.Check the clutch drum and clutch springs with regard to wear.
18.Clean the outside of the carburetor
19.Check the fuel filter, fuel hose, change if necessary.
20.Clean the inside of the fuel tank.
21.Check all cables and connections.
English – 21