SAFETY INSTRUCTIONS
3Muffler
!WARNING! During use and for some time after the muffler is very hot. Do not touch the muffler if it is hot!
The muffler is designed to give the lowest possible noise level and to direct the engine‘s exhaust fumes away from the user. The engine‘s exhaust fumes are hot and can contain sparks, which can lead to the outbreak of fire.
IMPORTANT INFORMATION! It is extremely important that the instructions for checking, maintaining and servicing the muffler are followed. (see the section “Control, maintenance and service of the machine’s safety equipment“).
!WARNING! The inside of muffler contain chemicals that may be carcenogenic. Avoid contact with these elements in the event om damaged muffler.
Control, maintenance and service of the machine‘s safety equipment
!WARNING! All service and repairs to the cut- off saw require special training. This applies especially to the
The purchase of one of our products guarantees that professional repair and servicing will be carried out on it. If the point of purchase is not one of our servicing dealers, please ask for details of the closest service workshop.
1 Anti-vibration system
Check the
Check that the
4 Throttle lock
The throttle lock is designed to prevent accidental opera- tion of the throttle control.
When you press the lock (A) (i.e. when you grasp the handle) it releases the throttle trigger (B).
When you release the handle the throttle trigger and the throttle lock both move back to their original positions. This movement is controlled by two independent return springs. This arrangement means that the throttle control is automatically locked at the idle setting when you release the handle.
A |
B |
2 Stop switch
Start the engine and make sure that the engine stops when the stop switch is moved to the stop position.
English – 5