Husqvarna 1152450-26 Machine′s safety equipment, Switch, Power switch lock, Guard for the blade

Page 9

SAFETY INSTRUCTIONS

Machine′s safety equipment

This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine.

WARNING! Never use a machine that has

!faulty safety equipment! Carry out the inspection, maintenance and service routines listed in this section.

All servicing and repair work on the machine

requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.

Switch

The power switch should be used to start and stop the machine.

Checking the power switch

•Start the machine, release the power switch and check that the engine and the cutting blade stop.

•A defective power switch should be replaced by an authorized service workshop.

Power switch lock

The power switch lock is designed to prevent accidental operation of the switch. When the lock (A) is pressed in the power switch (B) is released.

The power switch lock remains depressed as long as the power switch is depressed. When the grip on the handle is released both the power switch and power switch lock are reset. This movement is controlled by two independent return springs. This position results in the machine stopping and the power switch being locked.

Checking the power switch lock

•Make sure the power switch is locked when the power switch lock is in its original position.

•Press in the power switch lock and make sure it returns to its original position when you release it.

•Check that the power switch and power switch lock move freely and that the return springs work properly.

•Start the machine, release the power switch and check that the engine and the cutting blade stop.

Gradual start and overload protection

The machine is equipped with electronically controlled gradual start and overload protection.

The engine starts to pulsate if the machine is loaded above a specific level. If the load is reduced the engine reverts to its normal state and cutting can resume.

The electronics will cut the current after a set time if the machine continues to be run with a pulsating engine. The higher load the faster the shutoff.

The electronics cut the current immediately if the blade jams.

Guard for the blade

This guard is fitted above the cutting blade and is designed to prevent parts of the blade or cutting fragments from being thrown towards the user.

Checking the blade guard

WARNING! Always check that the guard is

!correctly fitted before starting the machine. Check that the cutting blade is fitted correctly and does not show signs of damage. A damaged cutting blade can cause personal injury. See instructions under the heading Assembly.

•Check that the guard is complete and without any cracks or deformations.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents English K3000 K3000 WetKEY to Symbols Symbols on the machineSymbols in the operator’s manual Contents What is what on the power cutter K3000? What is WHAT?What is what on the power cutter K3000 Wet? Safety Instructions Steps before using a new power cutterPersonal protective equipment Work area safety General safety warningsElectrical safety K3000Personal safety Power tool use and careService Switch Machine′s safety equipmentPower switch lock Gradual start and overload protectionCutting blades GeneralAbrasive discs Transport and storage Diamond bladesWhat is kickback? How to avoid kickbackGeneral working instructions Cutting techniqueGeneral rules How to avoid pinchingPull Pinching/rotationAssembly AssemblyFitting the cutting blade Guard for the bladeBefore starting Starting and StoppingStarting StoppingCleaning MaintenanceGeneral Electrical FeedBevel gear Daily maintenanceChecking the drive axle and flange washers Checking water connection with flow limiterTechnical Data Recommended cable dimensionsCutting equipment Applies to Europe only EC-declaration of conformity1152450-26 ´z+TM¶6¨ ´z+TM¶6¨

1152450-26 specifications

The Husqvarna 1152450-26 is a robust and versatile lawn mower designed for homeowners seeking efficiency and ease of use in maintaining their lawns. This model stands out due to its innovative features and a variety of technologies that enhance performance and user experience.

One of the most notable features of the Husqvarna 1152450-26 is its powerful engine, which ensures reliable performance and durability even in challenging conditions. The mower is equipped with a self-propelled drive system, which allows users to tackle larger areas without the strain of manual pushing. This feature is particularly beneficial for those with sloped or uneven terrains, making lawn care less labor-intensive.

The cutting system of the 1152450-26 is designed to provide a precise and clean cut. It features a 26-inch cutting deck that enables users to cover more ground in less time, while still maintaining control and maneuverability. The adjustable cutting height allows for customization according to individual lawn requirements, enabling users to choose between various grass lengths.

Husqvarna has integrated advanced technologies into the design of this mower. Among these is the Auto Walk™ system, which delivers effortless speed control, allowing users to easily adjust their pace while mowing. Additionally, the mower features a two-in-one cutting system that facilitates both mulching and side discharging of grass clippings. This dual functionality promotes a healthy lawn by allowing clippings to decompose and return nutrients to the soil.

Another key characteristic is its ergonomically designed handle that provides comfort during operation. This feature, combined with its lightweight construction, makes the Husqvarna 1152450-26 highly maneuverable, reducing fatigue during extended use. The mower is also designed with easy maintenance in mind. The quick-release handle and removable cutting deck make blade cleaning and maintenance straightforward, promoting longevity and optimal performance.

In summary, the Husqvarna 1152450-26 is a hallmark of innovation in lawn care technology. Its powerful engine, self-propelled drive, robust cutting system, and comfort-enhancing features make it an excellent choice for homeowners looking to maintain a pristine lawn with ease. Whether you're tackling a small yard or a more extensive landscape, this mower combines efficiency with user-friendly design, ensuring that lawn maintenance is a hassle-free experience.
Top Page Image Contents