Husqvarna 1152450-26 manual Assembly, Fitting the cutting blade, Guard for the blade

Page 14

ASSEMBLY

Assembly

WARNING! Always pull out the plug from the

!outlet socket before cleaning, maintenance or assembly.

Fitting the cutting blade

Husqvarna’s blades are approved for hand-held power cutters. Blades are manufactured with three different diameters of centre holes: 20 mm (0.787"), 22.2 mm (7/8") and 25.4 mm (1"). Bushings can be fitted on the machine axle to adjust the machine to the centre hole of the blade. Use a bushing with the correct diameter! The blades are marked with the diameter of the centre hole.

The blade is placed on the bushing (C) between the inner flange washer (A) and the flange washer (B). The flange washer is turned so that it fits on the axle.

Tightening torque for the bolt holding the blade is: 15-25 Nm (130-215 in.lb).

The cutting blade/axle can be locked by holding in the locking button on the rear of the machine. The button is spring-loaded and is reset when button is released.

When a diamond blade is mounted on the power cutter make sure that the diamond blade will rotate in the direction indicated by the arrow on the blade.

There is an arrow on the machine that indicates the axleís direction of rotation that the disc is mounted on.

When the blade is replaced with a new one, check the flange washers and the drive axle. See instructions under the heading Checking the drive axle and flange washers.

Checking the drive axle and flange washers

Check that the threads on the drive shaft are undamaged.

Check that the contact surfaces on the blade and the flange washers are undamaged, of the correct dimension, clean, and that they run properly on the drive axle.

Do not use warped, notched, indented or dirty flange washers. Do not use different dimensions of flange washers.

Guard for the blade

The guard must always be fitted on the machine.

The guard for the cutting equipment should be adjusted so that the rear section is flush with the work piece. Spatter and sparks from the material being cut are then collected up by the guard and led away from the user.

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents K3000 K3000 Wet EnglishSymbols in the operator’s manual KEY to SymbolsSymbols on the machine Contents What is WHAT? What is what on the power cutter K3000?What is what on the power cutter K3000 Wet? Personal protective equipment Safety InstructionsSteps before using a new power cutter Electrical safety General safety warningsWork area safety K3000Service Personal safetyPower tool use and care Power switch lock Machine′s safety equipmentSwitch Gradual start and overload protectionAbrasive discs Cutting bladesGeneral Diamond blades Transport and storageGeneral working instructions How to avoid kickbackWhat is kickback? Cutting techniquePull How to avoid pinchingGeneral rules Pinching/rotationFitting the cutting blade AssemblyAssembly Guard for the bladeStarting Starting and StoppingBefore starting StoppingGeneral MaintenanceCleaning Electrical FeedChecking the drive axle and flange washers Daily maintenanceBevel gear Checking water connection with flow limiterCutting equipment Technical DataRecommended cable dimensions EC-declaration of conformity Applies to Europe only1152450-26 ´z+TM¶6¨ ´z+TM¶6¨

1152450-26 specifications

The Husqvarna 1152450-26 is a robust and versatile lawn mower designed for homeowners seeking efficiency and ease of use in maintaining their lawns. This model stands out due to its innovative features and a variety of technologies that enhance performance and user experience.

One of the most notable features of the Husqvarna 1152450-26 is its powerful engine, which ensures reliable performance and durability even in challenging conditions. The mower is equipped with a self-propelled drive system, which allows users to tackle larger areas without the strain of manual pushing. This feature is particularly beneficial for those with sloped or uneven terrains, making lawn care less labor-intensive.

The cutting system of the 1152450-26 is designed to provide a precise and clean cut. It features a 26-inch cutting deck that enables users to cover more ground in less time, while still maintaining control and maneuverability. The adjustable cutting height allows for customization according to individual lawn requirements, enabling users to choose between various grass lengths.

Husqvarna has integrated advanced technologies into the design of this mower. Among these is the Auto Walk™ system, which delivers effortless speed control, allowing users to easily adjust their pace while mowing. Additionally, the mower features a two-in-one cutting system that facilitates both mulching and side discharging of grass clippings. This dual functionality promotes a healthy lawn by allowing clippings to decompose and return nutrients to the soil.

Another key characteristic is its ergonomically designed handle that provides comfort during operation. This feature, combined with its lightweight construction, makes the Husqvarna 1152450-26 highly maneuverable, reducing fatigue during extended use. The mower is also designed with easy maintenance in mind. The quick-release handle and removable cutting deck make blade cleaning and maintenance straightforward, promoting longevity and optimal performance.

In summary, the Husqvarna 1152450-26 is a hallmark of innovation in lawn care technology. Its powerful engine, self-propelled drive, robust cutting system, and comfort-enhancing features make it an excellent choice for homeowners looking to maintain a pristine lawn with ease. Whether you're tackling a small yard or a more extensive landscape, this mower combines efficiency with user-friendly design, ensuring that lawn maintenance is a hassle-free experience.
Top Page Image Contents