Cutting blades, General, Abrasive discs

SAFETY INSTRUCTIONS

Cutting blades

WARNING! A cutting blade may burst and

!cause injury to the operator.

Never use a cutting blade at a lower speed rating than that of the power cutter.

Never use a cutting blade for any other materials than that it was intended for.

General

•Cutting blades are available in two basic designs; abrasive discs and diamond blades.

•High-quality blades are often most economical. Lower quality blades often have inferior cutting capacity and a shorter service life, which results in a higher cost in relation to the quantity of material that is cut.

•Make sure that the right bushing is used for the cutting blade to be ﬁtted on the machine. See the instructions under the heading Assembling the cutting blade.

Suitable cutting blades

Cutting blades	K3000	K3000 Wet

Abrasive discs	Yes	Yes*

Diamond blades	Yes	Yes

Rescue blade	No	No

*Without water

Cutting blades for different materials

	Concrete	Metal	Plastic

Abrasive discs	X	X	X

Diamond	X
blades	X
blades

Hand-held, high-speed machines

Our cutting blades are manufactured for high-speed, portable power cutters. If blades from other manufacturers are used, ensure that the blades conform to all regulations and demands that concern this type of power cutter.

Special blades

Some cutting blades are designed for stationary equipment and for use with attachments.Such cutting blades must not be used on portable power cutters.

Always contact local authorities and make sure you are following applicable directives.

Blade vibration

The blade can become out-of-round and vibrate if an excessive feed pressure is used.

A lower feed pressure can stop the vibration. Otherwise replace the blade. The blade must be of the recommended type for the material to be cut.

Abrasive discs

The cutting material on abrasive discs consists of grit bonded using an organic binder. ”Reinforced blades” are made up of a fabric or ﬁbre base that prevents total breakage at maximum working speed if the blade should be cracked or damaged.

A cutting blade’s performance is determined by the type and size of abrasive corn, and the type and hardness of the bonding agent.

Check that the blade is approved for the same or higher speed according to the aproval plate of the engine. Never use a cutting blade with a lower speed rating than that of the power cutter.

Ensure the blade it not cracked or damaged in any other way.

Test the abrasive disc by hanging it on your ﬁnger and tapping it lightly with a screwdriver or the like. If the disc does not produce a resonant, ringing sound it is damaged.

Abrasive discs for different materials

	Disc type	Material

		Concrete, asphalt, stone masonry,
	Concrete disc	cast iron, aluminium, copper,
		brass, cables, rubber, plastic, etc.

	Metal disc	Steel, steel alloys and other hard
	Metal disc	metals.
		metals.

WARNING! Avoid using abrasive discs with

!water. The strength is impaired when abrasive discs are exposed to moisture.

10 – English

1152450-26 specifications

The Husqvarna 1152450-26 is a robust and versatile lawn mower designed for homeowners seeking efficiency and ease of use in maintaining their lawns. This model stands out due to its innovative features and a variety of technologies that enhance performance and user experience.

One of the most notable features of the Husqvarna 1152450-26 is its powerful engine, which ensures reliable performance and durability even in challenging conditions. The mower is equipped with a self-propelled drive system, which allows users to tackle larger areas without the strain of manual pushing. This feature is particularly beneficial for those with sloped or uneven terrains, making lawn care less labor-intensive.

The cutting system of the 1152450-26 is designed to provide a precise and clean cut. It features a 26-inch cutting deck that enables users to cover more ground in less time, while still maintaining control and maneuverability. The adjustable cutting height allows for customization according to individual lawn requirements, enabling users to choose between various grass lengths.

Husqvarna has integrated advanced technologies into the design of this mower. Among these is the Auto Walk™ system, which delivers effortless speed control, allowing users to easily adjust their pace while mowing. Additionally, the mower features a two-in-one cutting system that facilitates both mulching and side discharging of grass clippings. This dual functionality promotes a healthy lawn by allowing clippings to decompose and return nutrients to the soil.

Another key characteristic is its ergonomically designed handle that provides comfort during operation. This feature, combined with its lightweight construction, makes the Husqvarna 1152450-26 highly maneuverable, reducing fatigue during extended use. The mower is also designed with easy maintenance in mind. The quick-release handle and removable cutting deck make blade cleaning and maintenance straightforward, promoting longevity and optimal performance.

In summary, the Husqvarna 1152450-26 is a hallmark of innovation in lawn care technology. Its powerful engine, self-propelled drive, robust cutting system, and comfort-enhancing features make it an excellent choice for homeowners looking to maintain a pristine lawn with ease. Whether you're tackling a small yard or a more extensive landscape, this mower combines efficiency with user-friendly design, ensuring that lawn maintenance is a hassle-free experience.