Dimplex 190, LI 11TER+, Heat Pump, LI 16TER+ manual Device Information, Type and order code Design

11

11 Device Information

1Type and order code

2Design

2.1Model

2.2Degree of protection according to EN 60 529 for compact devices and heating components

2.3Installation Location

3	Performance data
3.1	Operating temperature limits:
	Heating water flow/return flow 1	°C / °C
	Cooling, flow	°C
	Air (heating)	°C
	Air (cooling)	°C

3.2Temperature spread of heating water at A7 / W35

3.3	Heat output / COP	at A-7 / W352				kW / ---
		at A-7 / W452				kW / ---
		at A2	/ W35 2			kW / ---
		at A7	/ W35		2	kW / ---
		at A7	/ W45		2	kW / ---
		at A10 / W35 2				kW / ---
3.4	Temperature spread of cooling water at A35 / W7
3.5	Cooling capacity / COP	at A27 / W7				kW / ---
		at A27		/ W18		kW / ---
		at A35		/ W7		kW / ---
		at A35		/ W18		kW / ---
3.6	Sound power level					dB(A)
3.7	Sound pressure level at a distance of 1 m (indoors)					dB(A)

3.8Heating water flow with an internal pressure differential of m³/h / Pa

3.9Cooling water flow with an internal pressure differential of m³/h / Pa

3.10	Air flow rate with an external static pressure differentia	m³/h / Pa
		m³/h / Pa
3.11	Refrigerant; total filling weight	type / kg
4	Dimensions, connections and weight
4.1	Device dimensions	H x W x L cm
4.2	Device connections to heating system	Inch

4.3Device connections to additional heat exchanger

	(waste heat recovery)		Inch
4.4	Air duct inlet and outlet (min. internal dimensions)		L x W cm
4.5	Weight of the transportable unit(s) incl. packing		kg
5	Electrical connection
5.1	Nominal voltage; fuse protection		V / A
5.2	Nominal power consumption 2	A2 W35	kW
5.3	Starting current with soft starter		A
5.4	Nominal current A2 W35 / cos ϕ		A / ---

6Complies with the European safety regulations

7Additional model features

7.1Defrosting

Type of defrosting Defrosting tray included

7.2Heating water in device protected against freezing

7.3Performance levels

7.4Controller internal/external

LI 11TER+

Reversible

IP 21

Indoors

Up to 58 / above 18

+7 to +20 -25 to +35 +15 to +40

9.7		5.0
7.1 / 2.9		6.6 / 2.7
		6.4 / 2.3
8.8 / 3.2		8.8 / 3.1
11.3 / 3.8		11.3 / 3.6
		9.6 / 3.1
12.2 / 4.1		12.1 / 3.9
6.5		5.0
8.8 / 2.8		8.8 / 2.8
10.9 / 3.3		10.8 / 3.2
7.6 / 2.1		7.5 / 2.1
9.5 / 2.5		9.5 / 2.5
	55 / 61
	50
1.0 / 3000
		1.9 / 10900
1.0 / 3000		1.3 / 5900

4200 / 0

2500 / 25

R404A / 5.1

136 x 75 x 88

G 1 1/4'' external G 1 1/4'' external

50 x 50

222

400 / 16

2.742.86

	23
4.9 / 0.8
		5.16 / 0.8
	3

Automatic

Reverse cycle Yes (heated)

Yes4

1

Internal

LI 16TER+

Reversible

IP 21

Indoors

Up to 58 / above 18

+7 to +20 -25 to +35

+15 to +40

.9..3		5..0
10.6 / 3.0		10.5 / 2.9
		9.9 / 2.5
12.8 / 3.4		12.7 / 3.2
15.1 / 3.8		14.9 / 3.6
		14.7 / 3.3
16.7 / 4.1		16.6 / 3.9
6.6		5.0
12.6 / 2.6		12.5 / 2.6
16.4 / 2.8		16.4 / 2.8
10.7 / 2.0		10.6 / 2.0
14.3 / 2.3		14.3 / 2.2
	57 / 62
	52
1.4 / 4500
		2.6 / 14600
1.4 / 4500		1.8 / 7000

5200 / 0

4000 / 25

R404A / 5.7

157 x 75 x 88

G 1 1/4'' external

G 1 1/4'' external

57 x 57

260

400 / 20

3.84.0

	25
6.9 / 0.8		7.2 / 0.8
	3

Automatic

Reverse cycle

Yes (heated)

Yes4

1

Internal

English

1.See operating limits diagram

2.This data indicates the size and capacity of the system. For an analysis of the economic and energy efficiency of the system, other parameters, such as, in particular, the defrosting capacity, the bivalence point and regulation, should also be taken into consideration. The specified values, e.g. A2 / W55, have the following meaning: 2 °C external air temperature and 55 °C heating water flow temperature.

3.See CE declaration of conformity

4.The heat circulating pump and the heat pump controller must always be ready for operation.

www.dimplex.de E-9