SECTION 3 – INSTALLATION
3-1. Selecting A Location
Movement
1
OR
YFalling Unit Can Cause Injury.
S Use lifting eye to lift unit only, |
NOT running gear, gas |
cylinders, or any other |
accessories. |
S Use equipment of adequate |
capacity to lift and support |
unit. |
S If using lift forks to move unit, |
be sure forks are long enough |
to extend beyond opposite |
side of unit. |
Location And Airflow
1
3
2
4
1Lifting Eye
2Lifting Forks
Use lifting eye or lifting forks to move unit.
If using lifting forks, extend forks beyond opposite side of unit.
3 Rating Label
Use rating label to determine input power needs.
4 Line Disconnect Device
Locate unit near correct input pow- er supply.
YSpecial installation may be required where gasoline or volatile liquids are present – see NEC Article 511 or CEC Section 20.
YBe careful when placing or moving unit over uneven surfaces.
18 in (460 mm)
18 in (460 mm)
Ref.