Powermatic 4224B operating instructions Safety warnings

Page 5

3.0Safety warnings

1.Read and understand entire owner's manual before attempting assembly or operation.

2.Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury.

3.Replace warning labels if they become obscured or removed.

4.This lathe is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a lathe, do not use until proper training and knowledge have been obtained.

5.Do not use this lathe for other than its intended use. If used for other purposes, Walter Meier (Manufacturing) Inc., disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

6.Always wear approved safety glasses or face shields while using this lathe. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

7.Before operating this lathe, remove tie, rings, watches and other jewelry, and roll sleeves up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor strips are recommended. Do not wear gloves.

8.Wear ear protectors (plugs or muffs) during extended periods of operation.

9.Some dust created by power sanding, sawing, grinding, drilling and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint.

•Crystalline silica from bricks, cement and other masonry products.

•Arsenic and chromium from chemically treated lumber.

Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.

5

10.Do not operate this machine while tired or under the influence of drugs, alcohol or any medication which may impair your judgment.

11.Make certain switch is in OFF position before connecting machine to power supply.

12.Make certain machine is properly grounded.

13.Make all machine adjustments or maintenance with machine unplugged from power source.

14.Remove adjusting keys and wrenches. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning it on.

15.Keep safety guards in place at all times when machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately after completion of maintenance.

16.Check damaged parts. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

17.Provide for adequate space surrounding work area and non-glare, overhead lighting.

18.Keep floor around machine clean and free of scrap material, oil and grease.

19.Keep visitors a safe distance from the work area. Keep children away.

20.Make your workshop child proof with padlocks, master switches or by removing starter keys.

21.Give your work undivided attention. Looking around, carrying on a conversation and “horse- play” are careless acts that can result in serious injury.

22.Maintain a balanced stance at all times so that you do not fall against the spindle, workpiece or other moving parts. Do not overreach or use excessive force to perform any machine operation.

23.Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and more safely.

24.Use recommended accessories; improper accessories may be hazardous.

25.Keep turning tools sharp and clean for the best and safest performance, and position tools properly in relation to the workpiece.

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Part No. M-1794224B Walter Meier Manufacturing IncWhat is COVERED? Warranty and ServiceTable of contents 17.3.2 Safety warnings About this manual Features Subject to local/national electrical codes SpecificationsDimensions Shipping contents Setup and assemblyInstalling legs Tools required for assemblyUnpacking and cleanup Tool caddy Bed and leg assembly is heavy. Use care when liftingLamp holder set BracketsInstalling Bed Extension only p/n Optional accessoriesAir/vacuum system 10.1 20-inch Bed Extension10.2 20 Bed Extension Kit 10.3 63-inch Bed Extension User-made shelf assemblyShelf Style 1 Figure Shelf Style 2 FigureThree phase operation Single phase operationElectrical connections Variable frequency driveExtension cords AdjustmentsHeadstock/tailstock movement Cam tightnessIndexer Tool supportLocking handles Live center and coneVacuum chuck Installing/removing Centers Installing/removingFace plate Installing/removing Spindle lockChecking spindle play Speed changeSheave and belt alignment Sheave/drive belt replacementOperation Operating controlsInspection Turning ToolsStock Selection Spindle TurningRoughing Out Cutting TechniquesFace Plate and Bowl Turning Wood Selection Mounting Stock Faceplate or Chuck?Checks and Cracks DistortionTo Shape Interior of Bowl Bowl Turning TechniquesTo Shape Outside of Bowl Maintenance Optional accessories Troubleshooting the 4224B Belt Positions for 4224B Replacement Parts Headstock Assembly Exploded View Index No Description Size Qty Headstock Assembly Parts ListIndex No Description Size ’ty 3520B-292 Bed and Leg Assembly Exploded View Bed and Leg Assembly Parts List 4224B-258 Lamp Holder Set Exploded View Index No. Part No Description Size Qty Lamp Holder Set Parts ListLamp Kit Parts List Vacuum System Exploded View Vacuum System Parts List Page Extension Bed Kit includes #1 thru 6294904 4224B-602 6295897 Offset Tool Support Pin Electrical Connections 4224B Lathe Page Page New Sanford Road LaVergne, Tennessee
Related manuals
Manual 48 pages 51.71 Kb

4224B specifications

The Powermatic 4224B is a premier wood lathe that exemplifies robust engineering and advanced technology, making it a favored choice among both professionals and hobbyists in the woodworking community. This lathe is designed to handle large workpieces with precision and ease, ensuring superior performance during various turning tasks.

One of the standout features of the Powermatic 4224B is its powerful 2-horsepower motor, which provides ample torque even at low speeds. This motor is housed in a heavy-duty cast iron construction, ensuring stability and reducing vibrations while in operation. The lathe's bed is also made from solid cast iron, offering a sturdy foundation and longevity that can withstand rigorous use.

The 4224B boasts an impressive 24-inch swing over the bed, allowing woodworkers to tackle large bowls and hollow forms. With an overall length of 42 inches, it accommodates a wide range of projects, making it versatile for different turning applications. It features a user-friendly digital readout for spindle speed, allowing operators to quickly and efficiently adjust settings to suit their specific needs.

In terms of technology, the Powermatic 4224B integrates an innovative SteadyRest and a Tailstock that provides enhanced stability and control during the turning process. The lathe also incorporates a 24-position index head, enabling precise indexing for decorative turning and ensuring accuracy in each rotation.

Another significant characteristic is its variable speed control, allowing users to switch speeds from 40 to 3200 RPM, catering to different materials and project requirements. The quick-change drive system enhances the ease of switching between speeds without the need for additional tools.

The electronic braking system adds an essential safety feature, rapidly stopping the spindle when needed, enhancing user confidence during operation. Additionally, the lathe comes equipped with adjustable feet, ensuring it can be leveled on uneven surfaces.

Overall, the Powermatic 4224B wood lathe is a well-rounded tool that combines power, precision, and versatility, making it an ideal choice for serious woodturners looking to elevate their craft. Its durable design, advanced features, and user-friendly operation make it an investment that can significantly enhance any woodworking workshop.
Top Page Image Contents