6.0 Specifications
Model number | 4224B |
Stock number | 1794224K |
Motor and electricals: |
|
Motor type | totally enclosed fan cooled, induction |
Horsepower | 3 HP (2.2 kW) |
Phase | 3 PH |
Voltage | 220V |
Cycle | 60Hz |
Listed FLA (full load amps) | 10 A |
Starting amps | 6 A |
Running amps (no load) | 3 A |
Power transfer | poly |
On/off switch | mushroom style push button |
Motor speed | 1720 RPM |
Variable frequency drive (inverter) | 2.2kW, 230V, 1 or 3 PH |
Power cord | 3/C 14AWG (300V) |
Power cord length | 6 ft. (183cm) |
Power plug installed | no |
Power requirements | 220V, 3PH or 1PH |
Recommended circuit size1 | 20A |
Noise emission, without load | 78 dB at 20 inches from motor |
Task lamp wattage, maximum | 100 |
Quad receptacles | 10A, 115V |
1subject to local/national electrical codes.
Capacities: |
|
|
Working distance between centers | 42” (1067mm) | |
Working distance between centers, optional 20” bed ext. mounted | ...................................................... 62” (1575mm) | |
Working distance between centers, optional 63” bed ext. mounted | .................................................... 105” (2667mm) | |
Maximum distance between spindle face and tailstock quill | ||
Swing over bed | 24” (609mm) | |
Swing over tool rest base | ||
Outboard turning diameter, maximum | 88” (2235mm) | |
Number of indexing positions | 98 | |
Swing over 20” bed extension in low position (optional accessory) | ||
Headstock and Spindle: |
|
|
Spindle taper | #2 Morse | |
Spindle thread size | ||
Spindle speed (RPM) | variable; High: | |
Outboard external threads | M35 x 1.5UNF | |
Headstock spindle bore | 5/8” (15.9mm) | |
Spindle direction | forward/reverse | |
Chuck vacuum pressure | 21 in/HG (53 cmHG) | |
Air hoses | 8mm O.D., 120psi | |
Air supply required | 90 psi | |
Air supply coupler | 1/4"NPT | |
Tailstock: |
|
|
Tailstock quill taper | #2 Morse | |
Tailstock bore | 3/8” (9.5mm) | |
Tailstock quill travel | ||
Materials: |
|
|
Legs | cast iron | |
Bed | cast iron | |
Headstock | cast iron | |
Tailstock | cast iron | |
Headstock spindle | hardened HRC50 on nose of thread, steel | |
Tailstock quill | hardened HRC20 steel, with laser etched scale |
8