Tool caddy, Lamp holder set, Brackets, Guard

8.With assistance, raise bed and leg assembly right-side up.

Bed and leg assembly is heavy. Use care when lifting.

9.Rotate the leveling feet as needed to establish level for the lathe.

10.Install headstock, toolrest base and tailstock, and both stop bolts (B, Figure 3).

7.5Tool caddy

Install tool caddy (Figure 7) to either end of lathe with two screws and washers (HP-5/6). The left end, near the headstock, is generally preferred. The tool caddy has holes for placing knockout rod, centers, faceplate wrench, air adaptors, etc. Accessories can also be stored in the tailstock cavity.

7.7Lamp holder set

1.Install shaft of lamp holder (F, Figure 9) into guard bracket hole, and tighten handle (G).

2.Install collar (H) beneath and tighten set screw on collar.

Figure 9

To install lamps:

3.Insert stud (J, Figure 10) into plate and secure with lock washer and nut (K/L).

4.Lift up collar (M) on lamp arm while pushing arm down completely onto stud. Push collar back down to secure.

Figure 7

7.6Brackets

1.Install guard bracket (C, Figure 8) with two screws and lock washers (HP-2/3).

2.Install comparator bracket (D, Figure 8) to tailstock with fasteners (HP-1/3/4). The bracket holes are slotted for alignment with guard bracket.

3.Install locking handle (E, Figure 8).

See section 9.11, “Comparator” for further information.

Figure 8

Figure 10

7.8Guard

The guard must always be used in operations that will allow its use.

See Figure 11.

1.Loosen set screw of outer collar (N) and remove collar.

2.Insert guard support rod into guard bracket while lifting up on plunger (O). Release plunger and it will snap into position as you slide support rod farther in.

3.Reinstall collar (N) on end of guard support rod and tighten set screw.

4224B specifications

The Powermatic 4224B is a premier wood lathe that exemplifies robust engineering and advanced technology, making it a favored choice among both professionals and hobbyists in the woodworking community. This lathe is designed to handle large workpieces with precision and ease, ensuring superior performance during various turning tasks.

One of the standout features of the Powermatic 4224B is its powerful 2-horsepower motor, which provides ample torque even at low speeds. This motor is housed in a heavy-duty cast iron construction, ensuring stability and reducing vibrations while in operation. The lathe's bed is also made from solid cast iron, offering a sturdy foundation and longevity that can withstand rigorous use.

The 4224B boasts an impressive 24-inch swing over the bed, allowing woodworkers to tackle large bowls and hollow forms. With an overall length of 42 inches, it accommodates a wide range of projects, making it versatile for different turning applications. It features a user-friendly digital readout for spindle speed, allowing operators to quickly and efficiently adjust settings to suit their specific needs.

In terms of technology, the Powermatic 4224B integrates an innovative SteadyRest and a Tailstock that provides enhanced stability and control during the turning process. The lathe also incorporates a 24-position index head, enabling precise indexing for decorative turning and ensuring accuracy in each rotation.

Another significant characteristic is its variable speed control, allowing users to switch speeds from 40 to 3200 RPM, catering to different materials and project requirements. The quick-change drive system enhances the ease of switching between speeds without the need for additional tools.

The electronic braking system adds an essential safety feature, rapidly stopping the spindle when needed, enhancing user confidence during operation. Additionally, the lathe comes equipped with adjustable feet, ensuring it can be leveled on uneven surfaces.

Overall, the Powermatic 4224B wood lathe is a well-rounded tool that combines power, precision, and versatility, making it an ideal choice for serious woodturners looking to elevate their craft. Its durable design, advanced features, and user-friendly operation make it an investment that can significantly enhance any woodworking workshop.