3.Lubricate the Gearbox through the four oil caps. Add a few squirts of oil every three hours of use.
4.Lubricate the leadscrew and lead- screw bearing frequently.
6.Wipe down the ways and slides after each use and lubricate with white lithium grease.
7.Applying oil to the bedways and other metal parts will protect the Lathe from rusting and pitting.
PLEASE READ THE FOLLOWING
CAREFULLY
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as
a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
5.Lubricate the tailstock oiling point every five uses, or once per week if used frequently.
SKU 45861 | For technical questions, please call | Page 20 |