must be able to withstand the vibra- tion generated by the Lathe during operation. The cabinet recommend- ed for use with this Lathe is SKU 46378; this product is available from Harbor Freight Tools.
3.Use a hoist or a forklift to lift the Lathe onto the cabinet or workbench.
4.Mount the Spacer Blocks. The Lathe must be completely level,
5.Mount the dip tray.
6.Thread on the belt tensioner lever.
7.The unpainted surfaces are coated with a waxy oil to protect them from corrosion during shipment. Remove the coating with a solvent cleaner or
When connecting or removing the
chuck, take care to protect the ways by placing a piece of wood, or other guard, over them. Damaging the ways may permanently disable the lathe.
Functions
1.The Lathe can be used to shape metal, make screws, and bore screw threads.
at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation:
Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
1.Settings for the spindle, chuck, gibs, ways, and ends, will be determined by the length of the stock and the intended operation.
2.The Lathe speed must be set to “0” before restarting.
Workpiece and Work Area Set Up
1.Designate a work area that is clean and
2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage.
3.Secure loose workpieces to prevent movement while working.
Operating Instructions
Read the entire Important
Safety Information section
SKU 45861 | For technical questions, please call | Page 10 |