Harbor Freight Tools 65345 operating instructions Contents

Page 2

CONTENTS
IMPORTANT SAFETY INFORMATION	3
GROUNDING	7
EXTENSION CORDS	7
SYMBOLOGY	8
SPECIFICATIONS	8
UNPACKING	9
PRODUCT FEATURES	9
ASSEMBLY INSTRUCTIONS	9
WORK AREA SET UP	9
DEFINITION OF TERMS	10
ADJUSTMENTS	11
OPERATING INSTRUCTIONS	15
MAINTENANCE AND SERVICING	17
PLEASE READ THE FOLLOWING CAREFULLY	18
TROUBLESHOOTING	19
PARTS LIST	20
ASSEMBLY DIAGRAM	21
WARRANTY INFORMATION	22

SKU 65345

For technical questions, please call 1-800-444-3353.

Page 2

Image 2

Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents General Power Tool Safety Save This ManualGfci reduces the risk of electric shock Lathe Safety Warnings For technical questions, please call Prong Plugs GroundingExtension Cords 25’ 50’ 75’ SymbologySpecifications Work Area Set Up Product FeaturesAssembly Instructions UnpackingDefinition of Terms See Figure D AdjustmentsTo Adjust The Spindle Speed RPM See Figures E and F, nextFigure E See Figure GTo Adjust The Tool Rest To Adjust The TailstockSee Figure J and Assy. Diagram To Install And Remove The Spur CenterSee Figure M To Install And Remove The Cup CenterTo Install And Remove The Faceplate See Figure N, nextSee Figure O Power Switch Safety SwitchOperating Instructions See Figure S See Figure QSee Figure R See Figure U Maintenance ServicingSee Figure T Please Read Following Carefully Troubleshooting Problem Possible Cause Possible SolutionParts List Assembly Diagram Limited 90 DAY Warranty