5.USE EYE AND BREATHING PROTECTION. Wear ANSI approved safety impact eye goffles and a full face shield when using this product. In work situations where excessive dust is produced, use an ANSI approved dust mask or respira- tor. ANSI approved safety impact eye goggles, full face shield, dust mask, and respirator are available from Harbor Freight Tools.
6.DRESS SAFELY. Do not wear loose clothing, jewelry, or gloves as they can become caught in moving parts. Wear a protective hair covering to prevent long hair from becoming caught in moving parts. If wearing a
7.DO NOT OVERREACH. Keep proper footing and balance at all times to prevent tripping, falling, back injury, etcetera.
8.INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.
9.STAY ALERT. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand.
10.CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the operation of this product. Replace or repair damaged or worn parts immediately.
11.REPLACEMENT PARTS AND ACCESSORIES: When servicing, use only identi- cal replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools.
12.MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean and dry for better and safer performance.
13.MAINTENANCE: For your safety, service and maintenance should be performed regularly by a qualified technician.
14.USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applica- tions for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended.
15.WARNING: The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors, which cannot be built into this product, but must be supplied by the operator.
SKU 04019 | PAGE 3 |