7.KEEP ALL SAFETY GUARDS IN PROPER WORKING ORDER, PROPER ADJUSTMENT, AND PROPER ALIGNMENT.
8.MAKE SURE THE WORKPIECE IS SECURELY MOUNTED IN THE MINI BENCH LATHE BEFORE TURNING ON THE LATHE. An excessively loose workpiece can fly off the Lathe, causing severe personal injury and/or property damage.
9.ALWAYS KEEP HANDS AND FINGERS AS FAR AWAY AS POSSIBLE FROM THE MOVING PARTS OF THE MINI BENCH LATHE
10.ALLOW THE WORKPIECE TO TURN UP TO FULL SPEED BEFORE FEED- ING A TOOL BIT (not included) INTO THE WORKPIECE. When turning off the Mini Bench Lathe, allow the Workpiece to slow down and stop on its own. Do not press against the Workpiece to stop it.
11.FEED THE TOOL BIT INTO THE WORKPIECE GRADUALLY. Do not force a tool bit to remove material faster than it is designed to cut.
12.NEVER ATTEMPT TO REMOVE MATERIAL STUCK IN THE MOVING PARTS OF THE MINI BENCH LATHE WHILE IT IS PLUGGED IN AND RUNNING.
13.NEVER STAND ON THE MINI BENCH LATHE. Serious injury could result if the Mini Bench Lathe is tipped or if the moving parts of the Lathe are accidentally contacted.
14.ALWAYS TURN THE POWER SWITCH (part #2) TO ITS “OFF” POSITION AND UNPLUG THE MINI BENCH LATHE FROM ITS ELECTRICAL OUTLET BEFORE PERFORMING ANY INSPECTION, ADJUSTMENTS, MAINTE- NANCE, OR CLEANING PROCEDURES.
15.WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from
16.WARNING: People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.
SKU 04019 | PAGE 5 |