Lubrication
Headstock Lubrication.
1.The headstock gears should be lubricated with No. 70
2.The oil in the headstock should be changed regularly. When the machine is new, change the oil after the first 15 days of use. Change it again after the next 45 days of use. Thereafter, change the oil after each 6 months. To change the oil, open the drain plug on the underside of the headstock. After draining, replace the drain plug and refill with clean lubricating oil until the oil level is at the red line on the oil gauge. Use stan- dard 30 weight motor oil. Dispose of waste oil properly, and in accordance with local regulations.
3.If during operation the oil level is below the red line, stop machining and add oil until the level is at the red line.
Overall Lubrication.
Lubricate the parts indicated in this diagram periodically with light grease. Check before each use to ensure that the machine is properly lubricated.
Fig. 17 Lubrication Chart. Lubricate the indicated areas with a light grease regularly.
SKU 43681 | For technical questions, please call | Page 14 |