13.AVOID UNINTENTIONAL STARTING. Be sure that you are prepared to begin work before turning the start switch on.
14.STAY ALERT. Watch what you are doing. Do not operate this machine when you are tired.
15.Do Not operatethis machinewhile underthe influence of alcohol, drugs, or prescription medicines.
16.CHECK FOR DAMAGED PARTS. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts, any broken parts or mounting fixtures, and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn on and off properly.
17.REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts intended for use with this tool. Replacement parts are available from Harbor Freight Tools. Use of any other parts will void the warranty.
Special Warnings when using this Bench Lathe
Using this Bench Lathe may create special hazards.
Take particular care to safeguard yourself and those around you.
Electrical Safety. Never operate any tool if there is an electrical hazard. Never oper- ate an electrical tool in wet conditions. Never operate a tool with an improper electrical cord or extension cord. Never operate an electrical tool unless you are plugged into a properly grounded outlet, which supplies 115 Volts at 60 Hz. We recommend you use a circuit which is protected by an appropriate circuit breaker.
Ejected Material. Use safe practices to avoid injury from ejected material. Because the lathe and the workpieces turn at high speed, there is a danger of being injured by materi- als that may be ejected. Always wear
Entanglement. Use extreme caution to prevent loose materials from being caught in the machine. Never operate this lathe with loose clothing, long hair, jewelry, or other items which may become caught in the tools or workpieces. In case of entanglement, press the OFF switch immediately.
NOTICE: No list of warnings can be all inclusive. The operator must supply common sense, and operate this tool in a safe manner.
SKU 43681 | For technical questions, please call | Page |