Grizzly G0657/G0658 owner manual Changing Speed Ranges, To change speeds

Page 21

Changing Speed

Ranges

The variable speed motors on the Model G0657 and G0658 allow the spindle speed to vary within three separate ranges. For greater speed variations, the belt in the headstock can be repositioned. A label on the top of the headstock illustrates the belt positions and their speeds.

To change speeds:

1.DISCONNECT LATHE FROM POWER!

2.Loosen the belt tension screw handle (Figure 16). Be sure the belt tension lever moves freely to release tension from the belt.

Belt Tension Lever

Belt Tension

Handle

 

 

Figure 16. Belt tension lever.

 

3.Open the rear access covers (Figure 17).

Upper Access Cover

Lower Access

Cover

Figure 17. Side and rear access covers.

G0657/G0658 Benchtop Lathe

4.Locate the desired speed on the speed chart on the rear of the lathe bed, and move the belt to the necessary grooves on the motor and spindle pulleys.

For Example: As indicated in the speed chart, on the G0657, belt position B creates an RPM range of 600-1800(Figure 18).

 

�����

 

��������

���������

 

���������

��������

�������

�����

 

 

��������

���������

 

���������

 

��������

������������

��������

 

 

Figure 18. G0658 Spindle speeds.

5.Move the belt tension lever down, adjusting tension so that when the belt is pressed with moderate force, ½" of belt deflection is mea- sured as shown in Figure 19, then tighten belt tension lever screw.

������

����������

������

Figure 19. Belt deflection.

6.Close the rear covers.

-19-

Image 21
Contents Benchtop Lathe Page Table of Contents Introduction Foreword Functional OverviewContact Info G0657/G0658 Identification G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe Additional Safety for Wood Lathes 110V Operation Circuit RequirementsSetup Safety Inventory SetupBox Contents Figure Qty Additional Contents G0658 only QtyG2544-Solvent Cleaner & Degreaser Clean UpSite Considerations G0657 G0658Mounting Setup To install the outboard turning attachment Model G0658 onlyTo prepare the lathe To test run the machine Test RunOperation Safety OperationsBasic Controls Tailstock Controls G0657/G0658 Benchtop Lathe To change speeds Changing Speed RangesAdjusting Tailstock Adjusting Tool Rest To position the tailstock along the bedTo position the tool rest base along the bed Installing/Removing Live Center Installing/Removing Spur CenterTo install the spur center To install the live centerTo install the faceplate Removing/Installing FaceplateTo remove the live center To remove the faceplateGouge Selecting Turning ToolsTo place the tool rest on the outboard turning attachment Outboard Turning G0658 OnlySpindle Turning To set up a spindle turning operationTo mount your workpiece to the faceplate Faceplate TurningTo mount your workpiece to a backing block Sanding/FinishingG1194-3-Jaw Chuck AccessoriesH7828-Tool Table Plus G1082-4-Jaw ChuckCleaning MaintenanceSchedule Unpainted Cast IronTroubleshooting ServiceSymptom Possible Cause Possible Solution To install new belt Changing BeltTo remove the old belt Motor Service Motor control box wiring G0657/G0658 Wiring DiagramG0657 Main Breakdown Description G0657 Main Breakdown Parts ListG0657 Main Breakdown Parts List Contd G0657 Labels Breakdown & Parts List G0658 Main Breakdown G0658 Main Breakdown Parts List G0658 Main Breakdown Parts List contd G0658 Labels Breakdown & Parts List Page Page Warranty and Returns

G0657/G0658 specifications

The Grizzly G0657 and G0658 models are highly regarded in the woodworking community for their robust design and innovative features. These band saws provide woodworkers with the precision and performance required for a variety of cutting tasks.

One of the main features of the Grizzly G0657 is its 10-inch resaw capacity. This allows users to slice through thick materials with ease, making it an excellent choice for those who work with larger lumber or who need to resaw thick boards into thinner slabs. The G0658, on the other hand, offers an impressive 14-inch resaw capacity, ideal for larger projects requiring deep cuts.

Both models are equipped with a powerful 2 HP motor, which provides ample power to tackle tough cuts without bogging down, ensuring a smooth and efficient operation. The induction motor is designed to provide consistent power, crucial for achieving accurate and clean cuts. Additionally, the variable speed control on these saws allows users to adjust the speed according to the material they're cutting, adding to their versatility.

The construction of the G0657 and G0658 is another highlight. Built with a heavy-duty steel frame, both models exhibit exceptional stability and durability, reducing vibrations during operation. This stability enhances cutting accuracy, which is particularly beneficial when dealing with detailed or delicate woodworking projects.

Another significant characteristic of these band saws is their easy-to-adjust blade guides. Featuring micro-adjustable upper and lower blade guides, users can fine-tune their settings with minimal effort, ensuring optimal blade performance and longevity. The easy-access tensioning and tracking controls also simplify blade adjustments, allowing users to focus more on their projects and less on setup.

Safety features are integral to both the G0657 and G0658. They include a blade break and a clear blade guard for added visibility during operations. The built-in dust collection port helps maintain a cleaner workshop environment by minimizing debris, allowing for safer and more efficient work conditions.

In conclusion, the Grizzly G0657 and G0658 band saws combine power, precision, and user-friendly features, making them an excellent investment for both amateur and professional woodworkers. With their robust construction, adjustable settings, and effective safety measures, these models stand out in the woodworking tools market. Whether you’re reshaping lumber or crafting intricate designs, these band saws are designed to meet a variety of woodworking needs with reliability and ease.