Grizzly G0657/G0658 owner manual Installing/Removing Spur Center, Installing/Removing Live Center

Page 23

Installing/Removing

Spur Center

The spur center installs into the headstock spin- dle with a taper fit.

To install the spur center:

1.DISCONNECT LATHE FROM POWER!

2.Insert the tapered end of the center into the spindle, and push it in quickly and firmly (Figure 23).

Headstock

Spindle Wheel

Spur Center

Figure 23. Inserting spur center into spindle.

3.Check that the center is securely installed by giving it a quick tug. (A properly installed center will not pull out by hand.)

To remove the spur center:

1.DISCONNECT LATHE FROM POWER!

2.Insert the knockout rod into the outboard end of the spindle. Use a shop rag or wear a glove to catch the center and gently tap the rod handle until the spur center is freed from the spindle (Figure 24).

Knockout Bar

Headstock

 

 

Spur Center

Spindle Wheel

 

 

 

Figure 24. Removing spur center.

Installing/Removing

Live Center

To install the live center:

1.Loosen the quill lock handle (if locked) approximately half a turn counterclockwise.

2.Rotate the quill handwheel clockwise until the tailstock quill protrudes out of the tailstock housing about 3⁄4''.

3.Insert the live center, as shown in Figure 25, and push firmly.

Quill Lock Handle

 

Quill

Quill

Handwheel

 

Live Center

 

Figure 25. Live center installed in tailstock.

4.Tighten the quill lock handle.

G0657/G0658 Benchtop Lathe

-21-

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Benchtop Lathe Page Table of Contents Contact Info IntroductionForeword Functional Overview G0657/G0658 Identification G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe G0657/G0658 Benchtop Lathe Additional Safety for Wood Lathes 110V Operation Circuit RequirementsAdditional Contents G0658 only Qty SetupSetup Safety Inventory Box Contents Figure QtyG0657 G0658 Clean UpG2544-Solvent Cleaner & Degreaser Site ConsiderationsMounting To prepare the lathe SetupTo install the outboard turning attachment Model G0658 only To test run the machine Test RunBasic Controls Operation SafetyOperations Tailstock Controls G0657/G0658 Benchtop Lathe To change speeds Changing Speed RangesTo position the tool rest base along the bed Adjusting Tailstock Adjusting Tool RestTo position the tailstock along the bed To install the live center Installing/Removing Spur CenterInstalling/Removing Live Center To install the spur centerTo remove the faceplate Removing/Installing FaceplateTo install the faceplate To remove the live centerGouge Selecting Turning ToolsTo place the tool rest on the outboard turning attachment Outboard Turning G0658 OnlySpindle Turning To set up a spindle turning operationTo mount your workpiece to the faceplate Faceplate TurningTo mount your workpiece to a backing block Sanding/FinishingG1082-4-Jaw Chuck AccessoriesG1194-3-Jaw Chuck H7828-Tool Table PlusUnpainted Cast Iron MaintenanceCleaning ScheduleTroubleshooting ServiceSymptom Possible Cause Possible Solution To remove the old belt To install new beltChanging Belt Motor Service Motor control box wiring G0657/G0658 Wiring DiagramG0657 Main Breakdown Description G0657 Main Breakdown Parts ListG0657 Main Breakdown Parts List Contd G0657 Labels Breakdown & Parts List G0658 Main Breakdown G0658 Main Breakdown Parts List G0658 Main Breakdown Parts List contd G0658 Labels Breakdown & Parts List Page Page Warranty and Returns

G0657/G0658 specifications

The Grizzly G0657 and G0658 models are highly regarded in the woodworking community for their robust design and innovative features. These band saws provide woodworkers with the precision and performance required for a variety of cutting tasks.

One of the main features of the Grizzly G0657 is its 10-inch resaw capacity. This allows users to slice through thick materials with ease, making it an excellent choice for those who work with larger lumber or who need to resaw thick boards into thinner slabs. The G0658, on the other hand, offers an impressive 14-inch resaw capacity, ideal for larger projects requiring deep cuts.

Both models are equipped with a powerful 2 HP motor, which provides ample power to tackle tough cuts without bogging down, ensuring a smooth and efficient operation. The induction motor is designed to provide consistent power, crucial for achieving accurate and clean cuts. Additionally, the variable speed control on these saws allows users to adjust the speed according to the material they're cutting, adding to their versatility.

The construction of the G0657 and G0658 is another highlight. Built with a heavy-duty steel frame, both models exhibit exceptional stability and durability, reducing vibrations during operation. This stability enhances cutting accuracy, which is particularly beneficial when dealing with detailed or delicate woodworking projects.

Another significant characteristic of these band saws is their easy-to-adjust blade guides. Featuring micro-adjustable upper and lower blade guides, users can fine-tune their settings with minimal effort, ensuring optimal blade performance and longevity. The easy-access tensioning and tracking controls also simplify blade adjustments, allowing users to focus more on their projects and less on setup.

Safety features are integral to both the G0657 and G0658. They include a blade break and a clear blade guard for added visibility during operations. The built-in dust collection port helps maintain a cleaner workshop environment by minimizing debris, allowing for safer and more efficient work conditions.

In conclusion, the Grizzly G0657 and G0658 band saws combine power, precision, and user-friendly features, making them an excellent investment for both amateur and professional woodworkers. With their robust construction, adjustable settings, and effective safety measures, these models stand out in the woodworking tools market. Whether you’re reshaping lumber or crafting intricate designs, these band saws are designed to meet a variety of woodworking needs with reliability and ease.
Top Page Image Contents