Jet Tools JWL-1642EVS owner manual Headstock Faceplate K, Fig

Page 11

8.Headstock Faceplate: (K, Fig. 8)

Used for turning bowls and plates. There are a number of screw holes for mounting the workpiece. Thread the faceplate onto the spindle in a clockwise direction, and tighten two set screws. Remove the faceplate by loosening two set screws. Push in headstock spindle lock and use the provided rod in faceplate holes to unthread the faceplate.

9.Headstock Indexing Hole: (L, Fig. 8) Thread indexing pin into the indexing hole making sure that it locates in the spindle hole. There are 12 holes in the spindle 30°

apart. There are three holes in the headstock casting that accept the indexing pin. These holes are 20° apart. The combination of holes will allow you to mark your workpiece for evenly spaced features. CAUTION! Never start the lathe with the index pin engaged in the spindle!

10.Tool Rest Body Lock Handle: (M, Fig. 9) Locks the tool rest body in position. Unlock handle to position the tool rest in any location along lathe bed. Tighten handle when properly positioned.

11.Tool Rest Lock Handle: (N, Fig. 9)

Locks the tool rest in position. Unlock the handle to position tool rest at a specific angle, or height. Tighten handle when properly positioned.

12.Tailstock Lock Handle: (O, Fig. 10) Locks the tailstock in position. Unlock handle to position the tool rest in any location along lathe bed. Tighten handle when properly positioned.

13.Tailstock Quill Lock Handle: (P, Fig. 10) Locks the tailstock quill in position. Unlock handle to position the quill. Tighten handle when properly positioned.

14.Tailstock Quill Handwheel: (Q, Fig. 10) Turn the handwheel to position the quill. The tailstock quill lock handle must be loose to position quill.

15.Tailstock Live Center: (R, Fig. 10)

Used for turning between centers. Quill taper is MT-2. Remove live center by retracting the quill until live center loosens. Remove, or add different tips to the live center by inserting the provided rod through

the holes in the center’s shaft. Unscrew the tip and change as needed.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 708359 09/02 JWL-1642EVS Wood LatheMore Information WMH Tool Group Warranty Warranty & ServicePage Diameter of Work Roughing RPM General Cutting Finishing RPM Volt Operation Grounding InstructionsIntroduction Table of ContentsInput Power 115V Only SpecificationsAssembly Contents of the Shipping ContainersUnpacking and Clean-Up Tool Basket Stand ShelfHeadstock RPM Knob G, Fig Controls & FeaturesGuard Headstock Faceplate K, Fig Lathe Tools Disconnect the machine from the power sourceSpeed Change Mounting Workpiece Between Centers Roughing Out Stock SelectionBeads CovesCuts PartingMounting Stock Sanding & FinishingFace Plate & Bowl Turning Distortion Face Plate or ChuckWood Selection Checks & CracksTo Shape Outside of Bowl Sanding and Finsihing To Shape Interior of BowlChanging the Belt and Bearings Adjusting Clamping MechanismProblem Possible Cause Solution TroubleshootingStand and Bed Assembly Index Part Description Size Qty Headstock Assembly JWL1642-MFC JWL1642-149 Wiring Diagram
Related manuals
Manual 32 pages 22.92 Kb

JWL-1642EVS specifications

The Jet Tools JWL-1642EVS and JWL-1642EVS-2 are standout lathes in the realm of woodturning, designed for both novice and seasoned woodworkers. These lathes offer unmatched versatility and precision, making them ideal for a wide variety of turning projects, from simple spindles to complex bowls.

One of the most notable features of the JWL-1642EVS is its powerful 1.5 HP motor that delivers excellent torque across a wide range of RPMs. This enhanced performance allows users to work with various wood species while maintaining smooth operation, a critical factor for achieving a high-quality finish. The electronic variable speed (EVS) control system provides convenient adjustments, allowing artisans to select the optimal speed for their specific turning needs. With a speed range from 40 to 3,600 RPM, craftspeople can effortlessly switch between fine detail work and aggressive stock removal.

The lathe's robust design is complemented by a cast iron bed that minimizes vibrations and ensures stability during operation. This construction not only enhances durability but also contributes to precise results, allowing users to create intricate designs without worrying about inconsistencies in the finish. Additionally, the JWL-1642EVS-2 variant offers an even larger capacity, with an impressive 16-inch swing over the bed and 42-inch length, accommodating larger workpieces.

Furthermore, both models feature a convenient electronic spindle lock, making the process of changing chucks and accessories quick and efficient. The adjustable swivel headstock allows for greater flexibility in accessing various angles, providing users with more control and comfort during operation.

Safety is also a priority in the design of the JWL-1642EVS and JWL-1642EVS-2, with features such as a safety restart switch, ensuring that the lathe cannot restart unexpectedly after a power interruption. Easy-to-read digital readouts for speed settings further enhance user experience by allowing for precise monitoring while turning.

Overall, the Jet Tools JWL-1642EVS and JWL-1642EVS-2 combine advanced technology, durable construction, and user-friendly features, making them indispensable tools for any woodturner looking to expand their craft and achieve professional-quality results. Whether you’re creating functional items or artistic pieces, these lathes empower users to elevate their woodturning endeavors.
Top Page Image Contents