Grizzly G0632 Aligning Centers, Changing Belt, To align the centers, To change the belt

Page 42

Aligning Centers

Changing V-Belt

Aligning Centers

To ensure accurate and safe turning results, the headstock and tailstock centers must be aligned with one another.

To align the centers:

1.With the headstock and tailstock centers installed, slide the tailstock up to the head- stock.

2.Loosen the headstock lock handle and swivel the headstock so the tip of the centers touch, as illustrated in Figure 56, then lock the headstock in place.

Figure 56. Center tips touching to ensure

alignment.

Changing Belt

To change the belt:

1.DISCONNECT THE LATHE FROM THE POWER SOURCE!

2.Remove the front belt access panel (see Figures 57 & 58).

3.Remove the spindle handwheel safety cover and the two long hex bolts.

4.Use a 3mm hex wrench to loosen the three set screws in the spindle handwheel and remove it from the spindle.

-40-

 

Front Belt

 

Access Panel

Spindle

Side Belt

Handwheel

 

Access Panel

Figure 57. Spindle handwheel and belt access

panels.

Figure 58. Headstock with spindle handwheel

and belt access panels removed.

5.Loosen the motor mount cap screw and secure the motor in the upper position (see Changing Speed Ranges on Page 24 for additional instructions).

6.Roll the belt off the motor (lower) pulleys, then pull the belt off the spindle pulleys and out the side belt access.

7.Install the new belt by reversing Step 6.

8.Re-tension the belt, and re-install the side belt access panel, the spindle handwheel and cover, and the front belt access panel.

Note: When properly tensioned, the belt should deflect about 1⁄4" when moderate pres- sure is applied to the belt mid-way between the upper and lower pulley.

G0632 16" x 42" Variable Speed Wood Lathe

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Model G0632 16 X 42 Variable Speed Wood Lathe Page Table of Contents Introduction ForewordContact Info Machine Data Sheet G0632 16 x 42 Variable Speed Wood Lathe Identification Page G0632 16 x 42 Variable Speed Wood Lathe G0632 16 x 42 Variable Speed Wood Lathe G0632 16 x 42 Variable Speed Wood Lathe Additional Safety Instructions for Wood Lathes 220V Single-Phase Circuit RequirementsItems Needed for Setup SetupSetup Safety UnpackingInventory Inventory Figures QtyHardware Recognition Chart Site Considerations Mounting to Shop FloorClean Up AssemblyTo assemble your lathe Tool rest installed on the tool rest Base Test Run Operation Safety Adjusting Headstock OperationsTo position the headstock along the length of the lathe bed Adjusting Tailstock To swivel the headstockTo position the tailstock along the length of the bed Adjusting Tool Rest Installing/Removing Headstock Center To install the headstock centerTo remove the headstock center with the knockout tool Installing/Removing Tailstock Center To install the center into the tailstock quillTo remove the center from the tailstock quill To install the headstock faceplate Headstock FaceplateFaceplate Turning on Changing Speed Ranges Diameter Roughing General Finishing WorkTo change speed ranges Speed range belt positions Indexing Indexing pin and indexing holesSelecting Turning Tools To set up a spindle turning operation Spindle TurningG0632 16 x 42 Variable Speed Wood Lathe Spindle Turning Safety Tips Faceplate Turning To mount the workpiece onto the faceplateTo mount your workpiece to a backing block Outboard Turning Sanding/FinishingH9586-Lathe Fundamentals AccessoriesG1194-3-Jaw Chuck G1082-4-Jaw ChuckModel H6542 Robert Sorby 8-PC Set G9863-8-PC HSS Lathe Chisel SetSchedule MaintenanceCleaning Lathe Bed LubricationService TroubleshootingWood Lathe Operation Service Log Date Approximate Hours Of Use Service PerformedTo align the centers Aligning CentersChanging Belt To change the beltModel G0632 RPM sensor wiring Electrical ComponentsWiring Diagram Overview WiringFrequency Inverter Wiring Diagram Stand & Bed Parts Breakdown Stand & Bed Parts List DescriptionHeadstock Parts Breakdown Headstock Parts List Label Placement Warranty and Returns G0632 16 x 42 Variable Speed Wood Lathe Page Page

G0632 specifications

The Grizzly G0632 is a versatile and powerful wood lathe, designed for both professional woodworkers and hobbyists seeking to expand their craft. Renowned for its robust construction and user-friendly features, the G0632 is ideal for turning bowls, spindles, and various wood projects.

One of the standout features of the Grizzly G0632 is its powerful 1 HP motor, which delivers consistent performance for a variety of turning applications. The motor is capable of running at variable speeds ranging from 450 to 3,200 RPM. This range offers woodworkers the flexibility to choose the optimal speed for their specific project, whether it be a delicate spindle or a larger, more robust bowl.

The lathe's bed is made from heavy-duty cast iron, providing exceptional stability and reducing vibration during operation. This is crucial in achieving smooth finishes on your workpieces. The robust construction also means that the G0632 can handle larger, heavier pieces of wood without compromising performance.

Another significant characteristic of the G0632 is its easy-to-use swivel headstock. This feature allows users to turn larger projects without the need for an extension, providing greater versatility in positioning the workpiece. The headstock can be locked in place to maintain accuracy during turning.

The G0632 also boasts a 12-inch swing capacity over the bed, allowing for turning objects up to 12 inches in diameter. Coupled with a 36-inch distance between centers, this lathe provides ample space for a range of projects, from small bowls to longer spindles.

In terms of technology, Grizzly has equipped the G0632 with a quick-release tailstock, which simplifies the process of adjusting and positioning your workpiece. It also features a 4-position indexing head, which is perfect for creating intricate designs and patterns on your work.

For added safety, the G0632 includes a sturdy handwheel for manual control, ensuring that users can operate the lathe comfortably and securely. Additionally, the lathe's overall design promotes ease of use, making it a great choice for both experienced woodworkers and newcomers.

In summary, the Grizzly G0632 wood lathe encapsulates quality and functionality, making it a valuable addition to any workshop. Its powerful motor, sturdy construction, and user-friendly features combine to provide an unparalleled turning experience. Whether you're crafting detailed spindles or larger projects, the G0632 is designed to meet your woodworking needs.
Top Page Image Contents