Unpacking, Contents of the Shipping Containers

Unpacking

Open shipping cartons and check that all parts are intact. Report any damage immediately to your distributor. Read the instruction manual thoroughly for assembly, alignment, and maintenance instructions.

Contents of the Shipping Containers

1XACTA Fence II

1Front Rail

1Rear Rail

1Guide Rail

3Black Plastic End Caps

1Hardware Package

1Owner’s Manual

1Warranty Registration Card

The contents of the hardware bag are drawn full scale in Figure 1.

Note 1: Quantities may vary depending upon whether you purchased the short rail or long rail.

Note 2: If the optional wooden extension table is not used, there will be extra hardware.

Tools Required for Assembly & Adjustment

1#3 Cross Point Screwdriver

17/16” Wrench

11/2" Wrench

1Combination Square & Straight Edge

1Electric Drill

11/4”, 3/16” Drill Bits

24”-6” C-Clamps

1 1/4”, 3/16” Allen Wrenches