It Warning

For your own safety, read the operator's manual before operating the drill press.

Wear eye protection.

Do not wear gloves, neckties, long sleeves, jewelry, or loose clothing that may become caught in

moving parts. Long hair must be contained.

Clamp the workpiece or brace it against the column to prevent rotation.

Use the recommended speed for drill accessories and workpiece materials.

KEEP GUARDS IN PLACE and in working order.

KEEP ALL BODY PARTS AWAY FROM MOVING PARTS. Avoid placing any part of your body

near belts, cutters, gears, etc.

REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from the machine before turning it on.

KEEP THE WORK AREA CLEAN. Cluttered areas and work benches invite accidents.

DON'TUSE IN A DANGEROUS ENVIRONMENT. Don'tuse power tools in damp or wet locations, or expose them to rain. Keep work area well lighted.

KEEP CHILDREN AWAY. All visitors should be kept a safe distance from the work area.

MAKE THE WORKSHOP KIDPROOF with padlocks, master swatches, or by removing starter keys.

DON'TFORCE THE MACHINE. It will do the job better and safer at the rate for which it was designed.

USE THE RIGHT MACHINE. Don'tforce a machine or attachment to do a job for which it was not designed.

USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your machine will draw. An undersized cord will cause a drop in the line voltage resulting in power loss and

overheating. If in doubt, use the next heavier gauge. Remember,the smaller the gauge number, the heavier the cord.

WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long hair.

ALWAYS USE SAFETY GLASSES. Also use face or dust masks if the cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses; they are not safety glasses.

DON'TOVERREACH. Keep proper footing and balance at all times.

MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for the best and safest performance. Follow instructions for lubricating and changing accessories.