Jet Tools 708358 Headstock Spindle Lock G, Fig, Headstock Spur Center L, Fig

Page 11

G.Headstock Spindle Lock: (G, Fig. 5)

Push in pin to keep the spindle from turning.

CAUTION!

Never press the headstock spindle lock while

the spindle is turning!

H.Headstock On/Off Switch: (H, Fig.5)

Flip the switch up to turn “ON” the lathe. Flip the switch down to turn the lathe “OFF”.

I.Headstock On/Off Switch Key: Remove key (I, Fig. 5) when in the “OFF” position. The switch will not work until key is reinstalled.

J.Headstock Speed Selector: (J, Fig. 5) Place handle directly above the desired RPM speed. Pull handle out and move to the desired speed, see Figure 6.

CAUTION!

Only change speeds while the spindle is

turning!

K.Headstock Faceplate: (K, Fig. 7)

Used for turning bowls. There are a number of screw holes for mounting the workpiece. Thread the faceplate onto the spindle in a clockwise direction, and tighten two setscrews. Remove the faceplate by loosening two setscrews. Push in headstock spindle lock and use the provided wrench on faceplate flats.

L.Headstock Spur Center: (L, Fig. 7)

Used for turning between centers. Spindle taper is MT-2. Remove spur center by inserting drift rod through the opposite end of the spindle and knocking spur center out.

M.Headstock Indexing Hole: (M, Fig. 7) Thread indexing pin into the indexing hole making sure that it locates in the spindle hole. There are 12 holes in the spindle 30° apart. Three holes in the headstock casting accept the indexing pin. These holes are 20° apart. The combination of holes will allow you to mark your workpiece for evenly spaced features.

CAUTION!

Never start the lathe with the index pin

engaged in the spindle!

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Part Number M-708358 WMH Tool GroupMore Information WMH Tool Group Warranty Warranty and ServicePage Speed Recommendations Volts Total Length of Cord in Feet Volt OperationDisconnect the machine from the power source Introduction Table of Contents 115V/230V, Prewired Specifications JWL-1442VSAssembly Contents of the Shipping ContainersUnpacking and Clean-Up Headstock Lock Handle E, Fig Stand Legs optional accessoryControls & Features Stand ShelfHeadstock Spur Center L, Fig Headstock Spindle Lock G, FigTailstock Lock Handle P, Fig Lathe ToolsMounting Workpiece Between Centers Roughing Out Stock SelectionParting BeadsCoves CutsMounting Stock Sanding and FinishingFace Plate and Bowl Turning Distortion Face Plate or ChuckWood Selection Checks and CracksTo Shape the Outside of a Bowl Sanding and Finishing a Bowl To Shape the Interior of a BowlChanging the Belt and Bearings Adjusting the Clamping MechanismProblem Possible Cause Solution TroubleshootingBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC BB-6006LLB Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Tool Basket Parts Breakdown Basket AssemblyWiring Diagram

708358 specifications

The Jet Tools 708358 is a powerful and reliable 15-Inch Planer, designed for both professional woodworkers and serious DIY enthusiasts. This robust machine combines advanced features with efficient performance, making it a valuable addition to any workshop.

One of the key highlights of the Jet 708358 is its powerful 3 HP motor, which operates at a 230V power supply. This motor provides the necessary torque to handle dense hardwoods and ensures consistent performance across a variety of applications. The combination of this motor and high-quality components makes it an excellent choice for those looking to achieve precision and speed in their woodworking tasks.

The Jet 708358 features a massive 15-inch cutting width, allowing users to tackle larger workpieces with ease. Its precise depth adjustment mechanism enables users to set the depth of cut from 1/16 inch up to a maximum of 1/8 inch. This feature is particularly useful when working with materials of different thicknesses, ensuring versatile operation without sacrificing accuracy.

Another notable technology integrated into the Jet 708358 is its helical cutter head. Unlike traditional straight blades, the helical design features multiple, staggered cutting edges that significantly reduce noise and provide a smoother finish on the workpiece. This cutter head also increases the lifespan of the knives, requiring less frequent replacements and maintenance.

The built-in dust collection system is another standout characteristic, featuring a 4-inch port that effectively removes wood shavings and debris from the work area. This not only keeps the workspace clean but also enhances visibility and safety during operation.

Additionally, the Jet 708358 is equipped with a user-friendly control panel, featuring easy-to-read depth adjustment levers and a convenient on/off switch. The sturdy, cast-iron frame ensures stability and reduces vibration, contributing to the accuracy and quality of every cut.

Overall, the Jet Tools 708358 offers a combination of power, technology, and features that make it a top choice for woodworkers seeking reliable and high-quality performance in their planing tasks. With its exceptional cutting capabilities and user-oriented design, it stands as a trusted workhorse in any woodworking environment.
Top Page Image Contents