Jet Tools 708358 Adjusting the Clamping Mechanism, Changing the Belt and Bearings

Page 20

Adjusting the Clamping Mechanism

The clamps are pre-set at the factory and should not need any adjustment. However, if adjustment is needed, remove the stud (A, Fig. 23). Loosen the locking handle and slide the headstock, tailstock or tool rest to the edge of the bed and slightly turn the hex nut (B, Fig. 23). Slide back into position and test the handle to make sure it securely locks.

Changing the Belt and Bearings

Changing belt and bearings can be a difficult task, and should be performed by a JET authorized repair station. Remove headstock and take into a repair station for servicing.

1.Place the belt in its highest speed range. Do not change speeds while changing the belt or bearings.

2.Remove the belt cover, and remove the belt from the lower pulley, see Figure 24.

3.Loosen the two setscrews in the handwheel enough to unthread the handwheel (C, Fig. 24).

4.Loosen the socket head cap screw enough to unthread the clamping nut (D, Fig. 24).

5.Remove one e-ring (E, Fig. 24) from spindle.

6.Loosen the two setscrews in the right hand pulley (F, Fig. 24).

7.Use a wood dowel, or aluminum stock to knock the spindle towards the tailstock. Use a material that is softer than the spindle so you do not mushroom the end of the spindle. Go only far enough to remove the right hand pulley and belt from spindle, see Figure 25 when changing the belt. Note: Mark the key way on the pulley for easy reference when reassembling.

8.Now you can replace the belt or bearings. There are three bearings #6, 9 and 43 that can be seen in the “Headstock Assembly,” page 24.

9.To reassemble reverse the procedure. Note: Key way alignment is critical for installment and proper operation. Do not force the pulley. When reinstalling clamping nut thread it on to the spindle until its snug.

Then back off slightly and tighten the socket head cap screw.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents WMH Tool Group Part Number M-708358Warranty and Service More Information WMH Tool Group WarrantyPage Speed Recommendations Volt Operation Volts Total Length of Cord in FeetDisconnect the machine from the power source Introduction Table of Contents Specifications JWL-1442VS 115V/230V, PrewiredAssembly Contents of the Shipping ContainersUnpacking and Clean-Up Stand Legs optional accessory Controls & FeaturesStand Shelf Headstock Lock Handle E, FigHeadstock Spindle Lock G, Fig Headstock Spur Center L, FigLathe Tools Tailstock Lock Handle P, FigMounting Workpiece Between Centers Stock Selection Roughing OutBeads CovesCuts PartingMounting Stock Sanding and FinishingFace Plate and Bowl Turning Face Plate or Chuck Wood SelectionChecks and Cracks DistortionTo Shape the Outside of a Bowl To Shape the Interior of a Bowl Sanding and Finishing a BowlAdjusting the Clamping Mechanism Changing the Belt and BearingsTroubleshooting Problem Possible Cause SolutionBed Assembly Index Part Description Size Qty Headstock Assembly JWL1442-MFC BB-6006LLB Stand Assembly optional accessory JWL-1442VS Safety Guard optional accessory Safety Guard Assembly Parts Breakdown Basket Assembly Tool BasketWiring Diagram

708358 specifications

The Jet Tools 708358 is a powerful and reliable 15-Inch Planer, designed for both professional woodworkers and serious DIY enthusiasts. This robust machine combines advanced features with efficient performance, making it a valuable addition to any workshop.

One of the key highlights of the Jet 708358 is its powerful 3 HP motor, which operates at a 230V power supply. This motor provides the necessary torque to handle dense hardwoods and ensures consistent performance across a variety of applications. The combination of this motor and high-quality components makes it an excellent choice for those looking to achieve precision and speed in their woodworking tasks.

The Jet 708358 features a massive 15-inch cutting width, allowing users to tackle larger workpieces with ease. Its precise depth adjustment mechanism enables users to set the depth of cut from 1/16 inch up to a maximum of 1/8 inch. This feature is particularly useful when working with materials of different thicknesses, ensuring versatile operation without sacrificing accuracy.

Another notable technology integrated into the Jet 708358 is its helical cutter head. Unlike traditional straight blades, the helical design features multiple, staggered cutting edges that significantly reduce noise and provide a smoother finish on the workpiece. This cutter head also increases the lifespan of the knives, requiring less frequent replacements and maintenance.

The built-in dust collection system is another standout characteristic, featuring a 4-inch port that effectively removes wood shavings and debris from the work area. This not only keeps the workspace clean but also enhances visibility and safety during operation.

Additionally, the Jet 708358 is equipped with a user-friendly control panel, featuring easy-to-read depth adjustment levers and a convenient on/off switch. The sturdy, cast-iron frame ensures stability and reduces vibration, contributing to the accuracy and quality of every cut.

Overall, the Jet Tools 708358 offers a combination of power, technology, and features that make it a top choice for woodworkers seeking reliable and high-quality performance in their planing tasks. With its exceptional cutting capabilities and user-oriented design, it stands as a trusted workhorse in any woodworking environment.
Top Page Image Contents