Jet Tools GH-2280ZX manual 10HP Large Spindle Bore Lathe, Universal Gear Box, Stock Number

22" x 80" ZX SERIES 10HP LARGE SPINDLE BORE LATHE

Universal	3-1/8"
Gear Box
	Bore Spindle

Heavy-Duty
One Piece	Foot
Cast Iron Base
	Break

22" x 80" ZX SERIES

10HP LARGE SPINDLE BORE LATHE

■Uniquely designed exclusively by JET

■ISO 9001 certified manufacturer

■3-1/8" bore spindle is supported by two tapered and one ball bearing

■Chrome molybdenum headstock gears are hardened, ground, and shaved

■Universal gear box allows inch, metric, diametral, and module pitch threads, no change gears required

■Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces

■T-slotted compound slide featuring a four-way tool post

■One-piece cast iron base absorbs vibration allowing heavier cuts

■High quality ANSI Class 50 wear-resistant cast iron

bed ways are hardened and ground

■Removable gap allows up to 23-5/8" diameter work on 16", 27-1/2" on 18"

■Five position automatic carriage stop increases productivity

■Attractive chrome control levers, dials, and knobs

■Tolerance test certificate included

■Also available with collet closer, taper attachments,

and digital readouts

Steady Rest

Standard

Equipment

STOCK NUMBER	321980
Model	GH-2280ZX
Swing Over Bed (in.)	22
Swing Over Cross Slide (in.)	13
Swing Through Gap (in.)	29-1/2
Length of Gap (in.)	12-1/4
Distance Between Centers (in.)	80
Spindle Bore (in.)	3-1/8
Spindle Mount	D1-8
Spindle Taper (with sleeve)	MT-7(MT-5)
Number of Spindle Speeds	12
Range of Spindle Speeds (RPM)	25-1,800
Number of Longitudinal and Cross Feeds	122
Range of Longitudinal Feeds (in./rev.)	.0015 – .0913
Range of Cross Feeds (in./rev.)	.0006 – .0365
Number of Inch Threads	61
Range of Inch Threads	1-5/8 – 72
Number of Metric Threads	24
Range of Metric Threads (mm)	.05 – 20
Maximum Tool Size (in.)	1 x 1
Maximum Compound Slide Travel (in.)	5-1/8
Maximum Cross Slide Travel (in.)	10
Maximum Carriage Travel (in.)	75
Tailstock Spindle Travel (in.)	5
Tailstock Taper	MT-5
Follow Rest Capacity (in.)	1/2 - 3-1/2
Steady Rest Capacity (in.)	3/8 – 7
Width of Bed (in.)	13-3/8
Overall Dimensions (in./L x W x H)	136-1/8 x 40 x 48-7/8
Motor	10HP, 230/460V, 3Ph, Prewired 230V
Net Weight (lbs.)	7400

jettools.com