ASSEMBLING UNIFENCE BODY TO GUIDE RAIL
1.Turn fence body (A) Fig. 34, upside down and lay it on a table or bench. Push handle (B) in against fence body. Make certain the surface (C) of clamp bracket is parallel to the face (D) of the fence body, and that the inside edge (E) of the clamp bracket is parallel to surface
(F) of the fence body. Turn handle (B) Fig. 32, if necessary.
2.Place fence body (A) Fig. 35, onto the guide rail as shown, making sure clamp bracket is inserted into channel (G) on rail. Notice that the clamp handle (B) is turned to the left indent position.
3.While pushing in on handle, turn to the right indent position as shown in Fig. 36. This will prevent fence clamp from sliding out of the channel (G).
C E F
B
D
Fig. 34
A
G
G
B
Fig. 35
B
G
Fig. 36
4.Lock fence body (A) to the guide rail by pushing down on handle (B) as shown in Fig. 37.
A
B
Fig. 37
11