Delta 36-902 instruction manual

Page 7

12.Assemble the table (A) to the two brackets (J) on the rear table support (K) Fig. 16, using two #8x7/8" screws.

13.Using a straight edge (S) Fig. 17, make certain the Unifence table surface is level with the saw table by adjusting two leveling screws located on the bottom of table legs and adjusting angle brackets (B) Fig. 13, use a level, side to side and front to back to make sure the table is level. IMPORTANT: Front edge of Unifence table must be flush with or slightly behind front edge of saw table.

ASSEMBLING UNIFENCE GUIDE RAIL TO A SAW WITH A LEFT SIDE SHEET METAL EXTENSION WING

When mounting a 36-902 Unifence to a saw with a left side sheet metal wing, if the ON/OFF switch is mounted to the extension wing proceed with step #1 if not proceed to step #2.

1.Remove the screw (A) Fig. 18 that attaches the ON/OFF switch to the sheet metal wing. Insert a 3/8- 16x1¼" hex head screw through the sheet metal wing and the ON/OFF switch bracket and place a 3/8" washer onto the screw, and thread a 3/8-16 hex nut onto the bolt, do not tighten the nut at this time. NOTE: LEAVE

THE HEX HEAD BOLT EXTENDED OUT THE FRONT OF THE SHEET METAL WING, THE GUIDE RAIL WILL BE ATTACHED TO THE END OF THE HEX HEAD SCREW.

2.Insert a 3/8-16x1¼" hex head screw (A) Fig. 19 through the sheet metal wing and place a 3/8" washer onto the screw, and thread a 3/8-16 hex nut onto the bolt, do not tighten the nut at this time. NOTE: LEAVE

THE HEX HEAD BOLT EXTENDED OUT THE FRONT OF THE SHEET METAL WING, THE GUIDE RAIL WILL BE ATTACHED TO THE END OF THE HEX HEAD SCREW.

J

K

A

Fig. 16

S

Fig. 17

A

Fig. 18

A

Fig. 19

7

Image 7
Contents Unifence Saw Guide 30 Capacity Unpacking IntroductionPage Assembling Table To SAW BA C B For Delta Table Saws only Page Assembling Unifence Guide Rail to Table Assembling Rail Stop Assembling Cursor to Unifence Body Adjusting Rail StopAssembling Unifence Body to Guide Rail Fence Operation Assembling Fence to Unifence BodyPage Ripping with Unifence Adjusting Clamping Action of Fence Locking Handle Adjusting Fence 90 Degrees to TableRipping on Left Side of SAW Blade Using the Fence AS a CUT-OFF GaugeUsing Auxiliary Wood Facing on the Unifence Constructing a Push Stick PushstickAccessories PARTS, Service or Warranty Assistance Canadian PORTER-CABLE Delta Service Centers

36-902 specifications

The Delta 36-902 is a powerful and versatile table saw designed for both professional woodworkers and serious DIY enthusiasts. Known for its exceptional precision and robust build quality, this saw has become a staple in workshops around the globe. This article will explore the main features, technologies, and characteristics of the Delta 36-902, highlighting its efficiency and functionality.

One of the standout features of the Delta 36-902 is its 15-amp motor, which delivers impressive power for cutting through a wide range of materials, including hardwoods and engineered wood. The motor provides up to 4,800 RPM, allowing for smooth and clean cuts. This is complemented by a heavy-duty cast iron table that measures 27 x 40 inches, providing substantial workspace for larger projects and ensuring stability during use.

The Delta 36-902 features a patented Unifence system that allows for easy adjustments and precise measurements. The fence can be easily moved, locked, and adjusted, providing unmatched accuracy for rip cuts. Additionally, it features an extensive cutting capacity, allowing for a maximum rip width of 30 inches, making it suitable for larger panels.

Another innovative technology integrated into the Delta 36-902 is its blade raising and lowering mechanism. This easy-to-operate crank allows for quick height adjustments, ensuring users can switch between various cutting depths efficiently. The saw also incorporates a high-quality blade guard system that enhances user safety, minimizing exposure to the blade while maximizing visibility.

The Delta 36-902 is built with user convenience in mind. It includes onboard storage for accessories, such as blades and wrenches, ensuring everything is organized and within easy reach. Additionally, its portability features, including a sturdy wheeled stand, make it easy to move the saw in and out of the workshop, providing versatility for different working environments.

Overall, the Delta 36-902 table saw combines robust construction, advanced technology, and user-friendly design, making it a preferred choice for woodworkers who prioritize precision and efficiency. With its powerful motor, extensive cutting capacity, and safety features, it is well-suited for a variety of woodworking tasks, from intricate joinery to large-scale panel cuts. Whether for professional use or home projects, the Delta 36-902 proves to be a reliable and effective tool.