Ripping

Ripping is the operation of making a length-wise cut through a board, as shown in Fig. 37, and the rip fence

(A)is used to position and guide the work. One edge of the work rides against the rip fence while the flat side of the board rests on the table. Since the work is pushed along the fence, it must have a straight edge and make solid contact with the table. The saw guard must always be used. The guard has anti-kickback fingers to prevent kickback and a splitter to prevent the saw kerf from clos- ing and binding the blade.

Start the motor and advance the work, holding it down against the fence. Never stand in the line of the saw cut when ripping. Hold the work with both hands and push it along the fence and into the saw blade as shown in Fig.

37.After the workpiece is on the table the work can then be fed through the saw blade with one hand, as shown in Fig. 38. After the work is beyond the saw blade and anti-kickback fingers the feed can continue to the end of the table, after which the work is lifted and brought back along the outside edge of the fence. The cut-off stock remains on the table or tilts up slightly and is caught by the rear end of the guard or slides off the table to the floor. If the cut-off stock remains on the table it is not touched with the hands until the saw blade is stopped, unless it is a large piece allowing safe removal. When rip- ping boards longer than three feet, it is recommended that a work support be used at the rear of the saw to keep the workpiece from falling off the saw table.

If the ripped work is less than 4 inches wide, a push stick should always be used to complete the feed, a shown in Fig. 39. The push stick can easily be made from scrap material as explained in the section “CONSTRUCTING PUSH STICK.” When ripping stock 2 inches or narrow- er, assemble an auxiliary wood facing to the fence, as explained in the section “USING AUXILIARY WOOD FACING ON RIP FENCE” and use a push stick.

Fig. 37

Fig. 38

Fig. 39

36-545, 36-540 specifications

The Delta 36-540 and 36-545 are highly regarded table saws designed for precision, durability, and efficiency. These models are widely used by woodworkers, both hobbyists and professionals, and they offer advanced features that enhance cutting capabilities and overall user experience.

One of the main features of the Delta 36-540 is its powerful 15-amp motor, which delivers ample torque and ensures that even the toughest hardwoods can be cut with ease. The motor is designed for smooth operation and minimal vibration, thereby enhancing accuracy during cutting tasks. The saw has a 10-inch blade that can reach impressive speeds, allowing for quick and clean cuts.

The Delta 36-545 model offers similar performance, but it comes with additional features that cater to more advanced users. Both models include a high-quality cast iron table, which provides a robust and stable surface for cutting. This construction helps reduce vibrations and increases the overall stability of the saw, ensuring precise cuts every time.

Both saws incorporate a patented blade-guard system, promoting safety in the workshop. This feature provides clear visibility of the cutting area while safeguarding the user from accidental blade contact. Additionally, the easy-to-use adjustment mechanisms allow users to modify blade height and angle quickly, simplifying the setup process for different cutting applications.

Another significant aspect of the Delta 36-540 and 36-545 is their fence systems. They come equipped with a reliable and adjustable fence that locks firmly in place, ensuring consistent and straight cuts. The alignment and precision of the fence save time during setup and provide users with confidence in their cuts.

Portability is also a key element in both models, with foldable stands that allow for easy transport and storage. Users can take their saws to job sites or store them away conveniently when not in use.

In summary, the Delta 36-540 and 36-545 table saws combine power, precision, and safety features designed to enhance the woodworking experience. With their robust construction, user-friendly adjustments, and advanced safety measures, these saws are an excellent choice for any woodworker looking for a reliable and efficient tool. Whether for professional use or personal projects, both models deliver exceptional performance, making them a staple in the woodworking community.