Delta 28-195 instruction manual Assembly Instructions, Assembling Stand and Feet

Page 8

ASSEMBLY INSTRUCTIONS

WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE OWNER’S MANUAL.

ASSEMBLING

STAND AND FEET

1. Assemble the stand, as shown in Fig. 4, using the

32 M8x20mm Carriage head screws, 3/8" flat washers

and M8 hex nuts supplied. The two 10-3/4 long upper

braces (A); 13-9/16 long upper braces (B); 15-3/4 long

lower braces (C); and 18-5/16 long lower braces (D)

should be fastened to the four legs (E). Insert the

B

E

A

carriage bolts through the legs and braces, place flat

washer on carriage bolt and secure with nut.

IMPORTANT: The top lips of the two upper braces (A)

should be on top of the top lips of upper braces (B).

2. Assemble the four feet (F) Fig. 4, to bottom of each

leg (E), as shown.

A

A

B

C

Fig. 5

ASSEMBLING

BAND SAW TO STAND

1.Place the band saw on top of the stand and line up the four holes, located on the feet of the band saw, with the four holes located on top of the stand.

2.Fasten the band saw to the stand using the four M8 x 35mm hex head bolts (A) Fig. 5, eight M8 flat washers

(B) and four M8 hex nuts (C), supplied. Place an M8 flat washer on the hex head bolt and insert bolt through hole on the band saw feet and hole in the stand. Place a flat washer on the hex head bolt that has been inserted through the saw and stand and secure with M8 hex nut.

3.Figure 6 illustrates the band saw assembled to the stand.

CD

F

Fig. 4

Fig. 6

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Band Saw General Safety Rules Additional Safety Rules for Band Saws Grounding Instructions Power ConnectionsMotor Specifications Unpacking and Cleaning Extension CordsFor Fig For Fig Assembly Instructions Assembling Stand and FeetAssembling Table To Machine Assembling Table InsertAssembling Table Alignment Screw Assembling Lamp To MachineOperating Controls and Adjustments Locking Switch OFF PositionAdjusting Blade Tension Starting Stopping SAWDisconnect Machine from Power Source Tracking the BladeAdjusting Upper Blade Guides Blade Support Bearing Adjusting Lower Blade Guides Blade Support Bearing Adjusting Table Positive Stops Tilting the TableAdjusting Upper Blade Guide Assembly Changing BladesMinimum Cutting Radius Miter Gage Wrench StorageDust Chute Accessory 28-196 RIP Fence Operating the Band SAWCutting Curves Band SAW BladesAccessories PARTS, Service or Warranty Assistance Canadian PORTER-CABLE Delta Service Centers

28-195 specifications

The Delta 28-195 is a renowned table saw that has garnered a reputation among woodworkers for its precision, reliability, and ease of use. This powerful tool is designed to handle a variety of cutting tasks, making it a versatile addition to any workshop.

One of the main features of the Delta 28-195 is its robust 1.75 HP motor, which delivers ample power for cutting through dense materials with ease. This performance is critical for both professional woodworkers and hobbyists who demand high-quality results. The saw operates on 120V power, allowing for convenient plug-and-play usage in most home workshops or job sites.

The Delta 28-195 boasts an impressive blade capacity of 10 inches, enabling users to make clean, precise cuts across a wide range of wood types and thicknesses. The table itself is generously sized, providing ample workspace for large projects and facilitating straightforward material handling. The table is also constructed from durable cast iron, ensuring stability while reducing vibrations during operation, which contributes to enhanced accuracy.

Another highlight of the Delta 28-195 is its advanced fence system. The fence is easy to adjust and locks securely in position, allowing for quick and accurate measurements for ripping tasks. The presence of a large and easy-to-read scale enhances operational efficiency, making it simple for woodworkers to set the desired dimensions before making their cuts.

Delta has also incorporated several safety features into the 28-195 model. The blade guard protects users from accidental contact with the spinning blade, while the riving knife helps prevent kickback, an essential aspect of safe table saw operation. Furthermore, the saw includes push sticks and other accessories to aid in maintaining safe distances from the blade during operations.

Dust collection is another critical area where the Delta 28-195 excels. Equipped with a 2.5-inch dust port, the saw connects easily to a dust collection system, helping to keep the workspace clean and reducing airborne particles, which can be harmful to health.

In conclusion, the Delta 28-195 table saw combines robust performance, advanced features, and enhanced safety, making it an excellent choice for both amateur and professional woodworkers. Its blend of technology, durability, and efficiency ensures that users can achieve precise cuts time and time again, making it a worthy investment for those serious about their craft.
Top Page Image Contents