Cobra Electronics LI 7500 WX Press the Channel Up or Channel Down button to, Privacy Code Scan

Page 12

Mode Functions

Operation

Duringchannelscan (whilereceiving an incoming transmission), you can choose from the following:

a. Press and hold the Talkbutton to communicate on that channel. Your radio will remain on that channel and return to Standby mode.

b. Press the Channel Up or Channel Down button to

Introduction

Operation

Customer Assistance Warranty

Privacy Code Scan

Your microTALK® radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.

Select Channel To scan privacy codes:

resume scanning channels.

If you press the Talkbutton while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to Standby mode.

If you do not press any button within 10 seconds after receiving a scanned transmission, your radio will automatically resume scanning channels.

During channel scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel or channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission. This will then return the radio to Standby mode.

b. Press the Mode button to proceed to set privacy

code scan on the channel that was either displayed before you entered mode functions or on which, during channel scanning, you last received a transmission (see page 19 for further details).

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission.

Mode Button

Scan Privacy Codes

Channel Buttons

1.While in Standby mode, press the Channel Up or Channel Down button to choose the channel on which you wish to scan privacy codes.

2.Press the Mode button until either the CTCSS or the DCS icon appears on the display and the Scan icon and the privacy code numbers flash on the display.

3.Press the Channel Up or Channel Down button to begin scanning privacy codes within the channel you selected.

The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds.

While setting privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code that was displayed before you entered mode functions.

18

19

Image 12
Contents Making Life Easier and Safer For Assistance in the U.S.AAutomated Help Desk Customer Assistance OperatorsProduct Features Warranty and Trademark AcknowledgementLimited One-Year Warranty on Radios & Charger Trademark AcknowledgementAvoid exposure to extreme temperatures Replace battery compartment cover and belt clipCaring for YourmicroTALK Radio Estimated operation time on full charge 12 hoursUsing Your Radio Battery LowAuto Battery Save For charging microTALK radios in desktop chargerTo switch from high to medium to low power Listening for a ResponseCall Button To alert another person that you are calling To Illuminate DisplayLock Feature Signal Strength MeterAuto Squelch/Maximum Range Earbud MicrophoneMode Functions Scrolling through Mode FunctionsPrivacy Codes Set Ctcss Privacy CodesSet DCS Privacy Codes NOAA* All Hazards Radio ChannelsMicroTALK Range Voice Activated Transmit VOX Memory LocationsPress the Mode button to Choose one of the followingTo recall a stored memory channel location While recalling a stored memory locationTo de-program a memory location Channel ScanTo scan channels Press the Mode button to proceed to set privacy Press the Channel Up or Channel Down button toPrivacy Code Scan Select Channel To scan privacy codesMemory Location Scan To scan memory locationsTo change call settings VibrAlert and Call AlertCall ToneSettings Keystroke TonesRoger Beep ConfirmationTone General Specifications FCC License General SpecificationsProduct Service Product Service Questions