Cobra Electronics LI 7500 WX owner manual Voice Activated Transmit VOX, Memory Locations

Page 9

Mode Functions

Operation

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK® radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Introduction

Operation

Customer Assistance Warranty

10 Memory Locations

•

Your microTALK® radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 21 for memory location scan.)

Mode Button

VOX Icon

Channel Buttons

Mode Button

VOXSensitivity Level

To turn VOX mode on or off:

1.Press the Mode button until the VOX icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn VOX on or off.

3.Choose one of the following:

a.Press the Mode button to enter the selected on or off setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected on or off setting and return to Standby mode.

To set VOX sensitivity:

1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.

Mode Button

Memory Icon

Channel Buttons

Lock/Enter Button

To program a memory location:

1.Press the Mode button until the Memory icon and the memory location flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Lock/Enter button.

The CTCSS icon and privacy code numbers will flash on the display.

2. Press the Channel Up or Channel Down

Channel Buttons

button to change the setting.

 

3. Choose one of the following:

a. Press the Mode button to enter the selected setting and proceed to other functions.

b. Press the Lock/Enter button to enter the selected setting and return to Standby mode.

12

13

Page 8 Page 10
Image 9
Page 8 Page 10
Contents For Assistance in the U.S.A Making Life Easier and SaferAutomated Help Desk Customer Assistance OperatorsWarranty and Trademark Acknowledgement Product FeaturesLimited One-Year Warranty on Radios & Charger Trademark AcknowledgementReplace battery compartment cover and belt clip Avoid exposure to extreme temperaturesCaring for YourmicroTALK Radio Estimated operation time on full charge 12 hoursBattery Low Using Your RadioAuto Battery Save For charging microTALK radios in desktop chargerListening for a Response To switch from high to medium to low powerCall Button To alert another person that you are calling To Illuminate Display Signal Strength Meter Lock Feature Auto Squelch/Maximum Range Earbud MicrophoneScrolling through Mode Functions Mode FunctionsPrivacy Codes Set Ctcss Privacy CodesSet DCS Privacy Codes NOAA* All Hazards Radio ChannelsMicroTALK Range Memory Locations Voice Activated Transmit VOXChoose one of the following Press the Mode button toTo recall a stored memory channel location While recalling a stored memory locationTo de-program a memory location Channel ScanTo scan channels Press the Channel Up or Channel Down button to Press the Mode button to proceed to set privacyPrivacy Code Scan Select Channel To scan privacy codesTo scan memory locations Memory Location ScanVibrAlert and Call Alert To change call settingsCall ToneSettings Keystroke TonesRoger Beep ConfirmationTone General Specifications General Specifications FCC LicenseProduct Service Questions Product Service
Top Page Image Contents