PRODUCT SPECIFICATIONS
Item | Description |
|
Electrical Requirements | 120 V / 60 Hz / 1800 W / Single Phase |
|
| 20 AMP Circuit Breaker | E221466 |
| 15 Amps | |
|
| |
Motor | 2.5 HP / 3,450 RPM |
|
Blade Speed | 3,400 RPM |
|
Product Compatibility | For use with SKU 91483 Stand (not included). |
|
Cutting Capacity | 24” Rip Length / 16” Diagonal / |
|
Saw Blade (not included) | 10” Continuous Rim, Diamond w/ 5/8” Round Arbor Hole |
|
Requirements | *Must Be Rated At 3,500 RPM Or Greater. |
|
Drive Type | Belt Drive / Size A660. |
|
Angle Cutting Capacity | 45° Left & Right Miter Block / 45° Right Bevel Block. |
|
Water Pump Capacity | 3.17 Gallons Per Minute. |
|
Overall Dimensions | 41” L x 21” W x |
|
Weight | 113 Pounds. |
|
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 18 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
GENERAL SAFETY RULES
| WARNING! |
|
| READ AND UNDERSTAND ALL INSTRUCTIONS |
|
| Failure to follow all instructions listed below may result in |
|
| electric shock, fire, and/or serious injury. |
|
| SAVE THESE INSTRUCTIONS |
|
|
| REV 04/05 |
| For technical questions, please call | |
SKU 91482 | Page 2 |