CAUTION !
8.1.8.When replacing the saw blade, use the part of the saw blade washer No. 48, which is in accordance with the saw blade shaft diameter. The outer diameter of the blade washer is 30 and 32 mm.
.
9. MAINTENANCE
9.1. PERIODIC CHECKS
9.1.1.Ensure that the table and all kind of parts are clean and dry. Degrease and dry the table. Especially ensure that the holding grips are clean and dry.
9.1.2.Remove all burr, chip and foreign materials from all surfaces of the machine. Use protective eye glasses.
9.1.3.Check the saw blade before each use. Turn the saw blade carefully (after removing the blade guard) to see the teeth of the saw blade. Replace the saw blade if it is damaged.
9.1.4.Check the pressure of the air pressure system. If necessary, adjust the air pressure between
(See Illustration 3)
9.1.5.Check the air pressure filters and the oil level of the conditioner. Fill up if the oil level is low. (See Illustration 3)
Unplug and disconnect the air pressure connections first, before carrying out these works.
20