+!% * $ | Atlas LS 14, LS 16 instruction

5 English

For precise and clean cutting jobs on roads, sidewalks and floors, the Atlas Copco LSC Cart for the Cut-off Saw is recommended. The use of the Cart gives a better working posture, and the cutting depth can be adjusted by means of an arm at the front of the Cart. The Cart is equipped with water kit. The Cart is not standard equipment.

A separate water kit with pressure tank is also available (see the spare parts list).

+!"% * "$

The following checks should be made each time you start to use the Cut-off Saw. All these checks concern the serviceability of the Cut-off Saw. Some concern your safety.

1.Check that the disc is in a good con- dition and properly attached

2.Clean all safety decals. Replace any that are missing or cannot be read

3.Inspect the hoses generally for signs of damage

4.Check for fluid leakages

5.Ensure that the hydraulic couplings are clean and fully serviceable

6.Ensure that any power source you plan to use is compatible with the model of the Cut-off Saw you are using. See the section Technical data. Atlas Copco recommends us- ing an oil flow divider, if the flow from the power source can exceed the maximum allowed oil flow (see the spare parts list)

WARNING

Do not exceed the maximum flow for the Cut-off Saw as this might lead to failure of the disc and damage of the tool.

10.Activate the water supply or aspira- tor if used

11.Place the Cut-off Saw at a right angle on the surface to be cut and activate the trigger lever

1.Release the trigger. Keep a firm grip on the Cut-off Saw, until the disc has come to a complete stop

WARNING

The inertia of the disc is very high. The Cut-off Saw could move and thereby injure persons or equip- ment if placed on the ground before the disc has come to a complete stop.

2.Stop the power source

3.Disconnect the hoses and fit the protective caps to the quick-release couplings

7.Connect the hoses

8.Mount the Cut-off Saw in the Cart (if a Cart is used)

9.Start the power source

￿+!"% ￿￿*￿￿￿￿ "$￿ ￿￿￿￿￿

+!"% * "$