Application Considerations

GAPA

The Infinityt Air Purifier is designed for use in the return air duct of a forced air heating, cooling, and ventilation system. Models GAPAAXCC1625 and GAPAAXCC2025 are specifically designed for use in systems with a forced air gas furnace.

Air Conditioning

The Infinityt Air Purifier should be installed in a system so that all the return air is circulated through the air purifier. It should be located upstream of both the furnace and the air conditioning evaporator coil. This will help keep the furnace and evaporator coil clean and prevent condensation from forming within the Infinityt Air Purifier.

Humidifiers

An evaporative humidifier can be mounted upstream of the Infinityt Air Purifier. It is best to install atomizing humidifiers downstream of the air purifier because hard water salt deposits and water droplets may damage air purifier. If an atomizing humidifier must be mounted upstream of the Infinity t Air Purifier, it should be mounted as far upstream as possible (at least 6 ft recommended), and a standard disposable furnace filter should be mounted between the humidifier and the air purifier to trap hard water salt deposits and water droplets.

Transitions

If the return air duct or furnace openings do not fit the Infinityt Air Purifier cabinet openings, gradual transitions are recommended to reduce air turbulence and maximize efficiency. No more than 20 degrees (about 4 in. per running ft) of expansion should be used on each side of the transition fitting.

Turning Vanes

If the Infinityt Air Purifier is installed adjacent to a 90 degree duct elbow, turning vanes should be added inside duct to improve air distribution across the face of the air purifier.

Electrical Power

The Infinity t Air Purifier should only be powered when airflow is present. The furnace control EAC terminals provide power only when the furnace blower is operating. Infinityt Air Purifier models GAPAAXCC1625 and GAPAAXCC2025 are designed to be powered from the electronic air cleaner (EAC) terminals on a furnace electronic control. If EAC terminals are not available, an alternative airflow sensing mechanism must be used to ensure the Infinityt Air Purifier is only powered when airflow is present. Contact local Carrier distributor for information on approved alternatives.

Door (x1)

Cabinet (x1)

Air Purification Cartridge (x1)

Enhancement Module (x1)

Safety Screen (x1)

		(x1)
Furnace Adapters (x2)	(x2)	(x1)
	(x2)	(x1)

(x2)

		Duct Gasket Tape
		(1 roll)
		(x2)
	Installation Manual	Installation Components
	Installation Manual	(in bag attached to power cord)
		(in bag attached to power cord)
		Return Duct Adapters:
		Long (x2) / Short (x2)

A06027

Fig. 2 - Infinityt Air Purifier Components

2025, 1625 specifications

The Carrier 1625 and 2025 are cutting-edge HVAC units designed to deliver superior efficiency and performance for residential and commercial applications. These advanced models have garnered attention for their innovative features, energy-saving technologies, and commitment to sustainability, making them ideal choices for modern indoor climate control.

One of the key highlights of the Carrier 1625 and 2025 is their energy efficiency. Both units are equipped with advanced variable-speed compressor technology, allowing them to adjust their output based on current cooling needs. This not only increases comfort levels but also significantly reduces energy consumption, translating to lower utility bills for users. With seasonal energy efficiency ratios (SEER) that exceed 16, both models meet rigorous energy efficiency standards set by regulatory bodies.

In addition to efficiency, these units prioritize quiet operation. The Carrier 1625 and 2025 feature specially designed sound-dampening cabinets and advanced fan technology, ensuring that they operate quietly without compromising on performance. This is particularly beneficial for residential settings, where noise can be a significant concern.

The Carrier 1625 and 2025 come equipped with cutting-edge smart technologies that enhance user experience. Wi-Fi connectivity allows homeowners and building managers to monitor and control their HVAC systems remotely via smartphone applications. This capability enables users to adjust settings, schedule maintenance, and receive alerts, providing unmatched convenience and peace of mind.

Another noteworthy feature is the use of eco-friendly refrigerants, which help reduce environmental impact without sacrificing performance. Carrier is committed to sustainability, and the 1625 and 2025 models reflect this commitment through their energy-efficient design and reduced greenhouse gas emissions.

Furthermore, both units are designed for easy installation and maintenance. Their modular components allow technicians to access parts with ease, facilitating quicker repairs and servicing, thus minimizing downtime.

In summary, the Carrier 1625 and 2025 represent the forefront of HVAC technology. With their energy-efficient operation, quiet performance, smart technology integration, and eco-friendly refrigerants, they are perfect for those seeking comfort and sustainability in their climate control solutions. Whether for residential or commercial use, these models provide an ideal balance of performance, innovation, and environmental responsibility, making them standout choices in the HVAC market.