PRODUCT SPECIFICATIONS
Item | Description |
Electrical Requirements | 120 V / 60 Hz / 3400 RPM |
| 1/2 HP / Single Phase Motor |
| Start Up AMPs: 10.2 |
| Circuit Breaker: 120V |
| 3 Prong, Grounded, Power Cord Plug |
Cutting Capacity | Up to |
Blade Size/Type | 7” Diamond With 5/8” Round Arbor Hole |
| *Must Be Rated At 3600 RPM Or Greater |
| (Diamond Blade not included; sold separately) |
Arbor Size | 5/8” Diameter |
Angle Cutting Capacity | Right Side of Table Tilts At: |
| 15°, 30°, 45°, 60° |
Water Compartment | 13” L x |
| Maximum Water Depth: |
Overall Dimensions | |
Weight | 16.3 Pounds |
Note: Sku 67111 7” Diamond Blade (wet) and Sku 67047 7” Diamond Turbo Blade (wet/dry) will fit this Tile Saw. Both blades are sold separately and are available from Harbor Freight Tools.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 17 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed in the following
pages may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
SKU 91511 | PAGE 2 | REV 07j; 09e |