Maintenance
CLEANING: Before remounting the Saw Blade, remove all sawdust that has accumulated around the Retractable Guard (part #32) and the Spacer (part #22), Bolts and Washers.
Regularly clean the work surface with a vacuum cleaner or a dry brush. At the end of every work session, remove sawdust from the motor vents. Prevent wood, dust
and debris from accumulating in the working area.
Keep the Saw Blade (#35) clean and sharp. A sharp blade will minimize stalling and kickback.
STORAGE:
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO NOT OPERATE THE TOOL.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBU- TOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDER- TAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLA- TION OF REPLACEMENT PARTS THERETO.
SKU 41903 | For technical questions, please call | Page 7 |