_i, WARNING: Always remove battery pack from your saw when you are assembling parts, making adjustments, assembling or removing blades, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause sedous personal injury.
TO REMOVE BATI'ERY PACK
•Locate latches on end of battery pack and depress to release battery pack from your saw. See Figure 3.
DEPRESSLATCHESTO
RELEASEBATTERYPACK
LATCHES
BATrERY
PACK
Fig. 3
•Remove battery pack from your saw.
TO INSTALL BATFERY PACK
See Figure 3.
•Place battery pack in your saw. Align raised rib inside saw with groove on battery pack.
•Make sure the latches on each side of your battery pack snap in place and battery pack is secured in saw before beginning operation.
ACAUTION: When placing battery pack in your saw, be sure raised rib inside saw aligns with groove on battery pack and latches snap in place properly. Improper assembly of battery pack can cause damage to internal components.
WARNING: A
TO ASSEMBLE OR REMOVE BLADE
TO ASSEMBLE BLADE:
•Remove battery pack from saw.
_k WARNING: Failure to remove battery pack from saw could result in accidental starting causing possible serious personal injury.
•Locate latches on end of battery pack and depress to release battery pack from your saw. See Figure 3.
•Remove blade wrench (5 mm hex key) from storage area. See Figure 2.
•Depress spindle lock button and remove blade screw and outer blade washer. See Figqre 4.
| INNER |
|
LOWER | OUTER | BLADE |
BLADE | BLADE | SCREW |
GUARD | BLADE WASHER |
|
HANDLE |
| Fig. 4 |
Note: Turn blade screw clockwise to remove.
•Wipe a drop of oil onto inner blade washer and
outer blade washer where they contact blade,
A
WARNING: If inner blade washer has been removed, replace it before placing blade on spindle. Failure to do so could cause an accident since blade will not tighten propedy.
10