Craftsman 315.2696 owner manual Switch, Applications, RIP Guidescrew

Page 8

KNOWYOURTRIMSAW

See Figure 2.

Before attempting to use any tool familiarize yourself with all operating features and safety requirements.

Features include easily operated bevel cut and depth of cut adjustment mechanisms; positive O° bevel stop; spindle lock; and blade wrench storage.

_, WARNING: If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

SWITCH

See Figure 2.

Your saw is equipped with a lock-off button which

reduces the possibility of accidental starting. The lock- off button is located on the handle above the switch

tdgger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released. Note: You can depress the lock-off button from either the left or right side.

APPLICATIONS

(Use only for the purpose listed below)

•Cutting all types of wood products (lumber, plywood, paneling).

RIP

GUIDESCREW

(WINGSCREW)LOCK-OFF BU'I'rON

SPINDLE

LOCKBUTTON

BLADEWRENCH

STORAGEAREA

DEPTHOF

CUTADJUSTMENT (DEPTHADJUSTMENTKNOB)

SWITCH

TRIGGER

RIP

GUIDESCREW (WINGSCREW)

UPPER

BLADEGUARD

BEVELCUT

LOWER

ADJUSTMENT

BLADEGUARD

(BEVELADJUSTMENTKNOB)

BLADE

 

BASE

RIPGUIDE

 

ASSEMBLY

 

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents OwnersManual 2 in. Professional Cordless Trim SAW Nrtl= Warning Store in the United StatesSymbol Meaning Safety Alert Symbol Read ALL InstructionsCharger Important Safety Rules for BAI-FERY ToolsDo not Charge Battery Tool in a Damp or WET Location Important Safety Instructions for Trim Saws Keep Guards in Place and in WorkingKeep Hands Away from Cutiing Area Lower Blade GuardPage Charger ChargerRIP Guidescrew SwitchApplications Charging Your Trim SAW To ChargeTo Remove Batiery Pack To Remove Blade SpindleBlade Screw Wrench SAW Blades Blade Guard SystemTo Lessen the Chance of Kickback Wrong RightDepth of CUT Adjustment To Adjust Blade DepthDepth Base Adjustment Assembly Knob Starting a CUTRemember To Cross CUT or RIP CUTTo Help Maintain Control Base Assembly Widthof CUT Scale Blade To Assemble RIP GuideWidth of CUT Scale RIP Guide Edge GuideLower Bladeguard To Adjust Bevel SeifingTo Bevel CUT To Check Page Battery Pack Removal Preparation for Iecycling BareriesCraftsman Cordless Trim SAW Model Number Parts List Call 9 am 5 pm, Monday Saturday
Top Page Image Contents