Windsor QQS34SP, QQS28 operating instructions Safety, Hazard Intensity Level

Page 4

SAFETY

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNINGand CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

!WARNING

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

!CAUTION

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

For SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

Before use all covers and doors shall be put in the positions specified on the instructions

WHEN USING MACHINE:

Use caution when backing machine.

Do not carry riders on the machine.

During operation attention shall be paid to other per- sons, especially children.

Always follow basic safety and traffic rules.

Go slow on slippery surfaces and grades.

When leaving unattended, secure against uninten- tional movement.

BEFORE LEAVING OR SERVICING MACHINE:

Stop on a level surface.

Set the parking brake.

Turn off the machine.

Remove key from switch.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jack- ets, shirts, or sleeves when working on the machine.

Block machine tires before jacking machine up.

Use hoist or jack of adequate capacity to lift machine.

Disconnect battery connections before working on machine.

Avoid contact with battery acid.

Use Windsor supplied replacement parts.

!CAUTION

This machine is not suitable for picking up health en- dangering or hazardous dust.

!WARNING

This appliance has been designed for use with the brushes specified by the manufacturer. The fitting of other brushes may affect its safety.

!WARNING

Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep cov- ers open when charging.

!WARNING

Flammable Materials Or Reactive Metals Can Cause explosion or fire. Do Not Pick Up These Materials.

!WARNING

Hazardous Voltage. Shock can result. Disconnect batteries before working on machine. Only qualified personnel should work inside machine.

!WARNING

Machine can emit excessive noise. Consult with your regulatory agency for exposure limits. Hearing loss can result. Wear hearing protection.

4

SABER/STRIDE II 28/34 98570 7/14/98

Image 4
Contents Saber StrideUsing this Manual Machine Data LOGYour Dealer OverviewTable of Contents Safety Hazard Intensity LevelTechnical Specifications MODELSABER/STRIDE II 28/34Operation Controls Machine Operation Emptying and Cleaning Tanks Double ScrubMaintenance Scrub BrushesUncoated Floors Finished FloorsScrub Deck Skirt and Squeegee Squeegee BladesCorrect Not Enough TOO MuchAdjusting Squeegee To Adjust Squeegee PitchTo Adjust Amount of Rear Squeegee Deflection Tires and WheelsBattery Maintenance Checking Battery Specific GravityBatteries Checking GravityTo Charge the Batteries Changing BatteriesService Schedule Before Starting Work Period End of Work StoringSqueegee BLADE/BRUSH Head Options Squeegee Blade Options Brush Head OptionsService Location Details ALL ModelsService Location Parts List