Johnson Hardware V-24, VH-24, E-16, V-40, VH-40, V-16 instruction manual Section I Manual

Page 1

4/29/03

JOHNSON VERTICAL BAND SAWS

INSTRUCTION MANUAL AND PARTS LIST

SECTION I – Manual

FOR MODELS

E-16

V-16

V-24

VH-24

V-40

VH-40

MODEL: ________________________________________

SERIAL NUMBER: ________________________________

DATE PURCHASED: ______________________________

DAKE Division of JSJ 724 Robbins Road

Grand Haven, Michigan 49417 616.842.7110 Phone 800-937-3253 616.842.0859 Fax 800-846-3253 Web: www.dakecorp.com

E-mail :customerservice@dakecorp.com technicalsupport@dakecorp.com

Manual V-16, V-24, VH-24, V-40 & VH-40

1 – Section I

Image 1

Contents Section I Manual Foreword Section I Table of Contents Model Number Capacity Specifications29/03 29/03 Machine Unpacking and Installation Filling the Speed Regulator PrecautionsWheel Alignment Blade InstallationBlade Guides Blade TensioningBlade Guides High Speed Roller Guides Upper Guide InstallationAre the same for both single and double bearing assemblies Band Speed Selection 29/03 Speeds and Feeds SAW Blade SelectionMaterial Alloy COLD-WORK Nitronic 50,60 Speed / Cutting Rate Reduction for Hard MaterialsRate Reduction Welding Instructions General Description Hydraulic Feed TablePreparation of Blade Clamping the Blade Ends AdjustmentWelding AnnealingPoor Welds / Trouble Shooting Welder Layout and Controls Welder MaintenanceRE-FINISHING the Weld USE of Standard and Optional Accessories Machine MaintenanceAlways Contact Dake Before Removing the Welder Slots